BLAST WASH Pass Through Dishwasher – AT50H

The Blastwash AT50H is a commercial pass-through hood dishwasher built for busy restaurants, pubs, hotels, and function venues that need fast, reliable dishware turnaround through a dedicated wash station. Designed in Australia and made in Italy, the AT50H pairs a lift-up hood, 500 × 500 mm rack, and Thermostop sanitisation for professional-grade cleaning cycle after cycle.

Benefits

Benefits

• 4 selectable wash cycles for different soil loads
• Built-in detergent and rinse aid dispensers — no manual dosing
• Door (hood) safety switch stops the machine if the hood is lifted mid-cycle
• Thermostop system ensures 80–85 °C rinse for 100% sanitisation
• Drain pump for flexible waste installation — routes up and over to the nearest drain
• Heavy-duty commercial-grade stainless steel construction
• Designed in Australia, made in Italy

Specifications

Venue suitability

Built for mid-to-high-volume restaurants, pubs, hotels, function venues, and catering operations running a dedicated wash station. The 500 × 500 mm rack and pass-through hood design let kitchen-hands load, wash, and unload racks in a flowing line — significantly faster than underbench dishwashers for multi-course service. The 45 cm tall-item clearance means plates, trays, and even service platters go through without repositioning. 400 V 3-phase power means this sits in established commercial kitchens, not small café setups — confirm your sparky is happy with the install before ordering.

Installation notes

The AT50H runs on 400 V 3-phase power with a 16 A supply — a licensed electrician must confirm your switchboard can support it before install. The integrated drain pump lets the waste line route flexibly (up and over if your drain is awkward), so installation flexibility is good even in older kitchens. Water connection is a standard 3/4″ hose — both hot and cold feed options work. The hood-type design means you need ceiling clearance above the unit (typically 300 mm above the closed-hood height) for the hood to lift — confirm your ceiling height against the supplier install sheet before committing.

Frequently asked questions

Q: Does the AT50H need 3-phase power, or will single-phase work? A: The AT50H requires 400 V 3-phase power with a 16 A supply. A licensed electrician needs to confirm your kitchen switchboard supports it before install. This is standard for commercial pass-through dishwashers at this throughput — most established commercial kitchens will already have 3-phase available.

Q: How tall a plate or tray can fit through the unit? A: The tallest washable item is 45 cm (450 mm). That clears standard dinner plates, serving trays, function platters, and tall glassware without repositioning. The 500 × 500 mm rack size means most standard racks from other pass-through systems are cross-compatible.

Q: What ceiling clearance do I need above the dishwasher for the hood to lift? A: The hood needs roughly 300 mm of clearance above the closed-hood height for the lift-open operation — confirm exact clearance against the supplier install sheet. The unit is approximately 1500 mm tall with the hood down. Most commercial kitchens with standard 2.4 m+ ceilings are fine, but low-ceiling fitouts need a measurement check before ordering.

Q: How does the drain pump help with installation? A: The integrated drain pump actively pushes wastewater out, so the drain line can be routed up and over to the nearest floor drain or sink — useful when the kitchen drain isn't directly below the dishwasher. Gravity-drain pass-through units can't do this.

Q: What's included as standard, and what do I need to add? A: The AT50H ships with built-in detergent and rinse aid dispensers — no aftermarket dosing system to add. Racks for plates, cutlery, and glasses are typically ordered separately based on your service mix. Detergent and rinse aid chemical supply is not included and is an ongoing consumable.

Q: What's the warranty and after-sales support? A: 24 months full warranty from delivery. The AT50H is Italian-built (Blastwash brand), and parts are stocked locally through our Granville NSW warehouse for fast turnaround on warranty claims and service call-outs.

Related

• Compare all pass-through dishwashers
• Browse the full Blastwash range