A pastry sheeter rolls dough out to an even, repeatable thickness far faster than a rolling pin, which is what makes laminated pastry, croissants and large flatbreads practical at volume. This collection covers benchtop and floor-standing sheeters from Mecnosud, Tyrone and Yasaki. For pizza rollers, dividers and rounders, see our dough rollers and dividers.
Benchtop or floor-standing
Benchtop sheeters
Benchtop sheeters suit bakeries and pastry kitchens with limited floor space. The Mecnosud PSM0570 has a 500 mm roller with 700 mm tables on each side, rolls from 0 to 36 mm at variable speed, runs on 550 W from a standard outlet, and its arms fold for storage. The Tyrone JDR-520B bench sheeter has a 500 mm food-grade belt, an 830 mm table and a 1 to 35 mm range through a 40 mm roller opening, and runs from a 10 A outlet.
Floor-standing sheeters
Floor-standing sheeters handle larger batches and longer sheets, and keep the bench free for other work, but they need a dedicated floor position and a three-phase supply. The Mecnosud PSM6120 has 600 mm chromium-plated rollers, 0 to 50 mm thickness and 1,316 mm tables on each side, for an overall width of 3,290 mm. The Tyrone JDR-650/3N has a 630 mm belt and the Yasaki JDR-520/3N a 500 mm belt. All three floor models are three phase.
What to check before you order
-
Overall length. Measure with the tables open; the Mecnosud PSM6120 is 3,290 mm wide in use, and the PSM0570 is 1,520 mm.
-
Belt or roller width. Match it to the widest sheet you make, from 500 mm up to 630 mm here.
-
Thickness range. Laminated pastry needs thin sheets; check the minimum thickness on each listing.
-
Power. Benchtop models run on single-phase power; the floor models here need a three-phase supply, and the PSM6120 arrives without a plug.
For help choosing, read our guide to dough sheeters vs dough rollers, and see our wider bakery equipment range. Popular models include the Mecnosud PSM0570 benchtop pastry sheeter and the Tyrone JDR-520B bench dough sheeter.
Frequently asked questions
What is a pastry sheeter used for?
Rolling dough into long, even sheets for laminated pastry, croissants, puff pastry and flatbreads, at a consistent thickness and much faster than by hand.
How much space does a pastry sheeter need?
Allow for the tables when they are open. The Mecnosud PSM0570 benchtop sheeter is 1,520 mm wide in use with folding arms, and the floor-standing PSM6120 is 3,290 mm wide.
Do pastry sheeters need three-phase power?
The floor-standing models here do: the Mecnosud PSM6120, Tyrone JDR-650/3N and Yasaki JDR-520/3N. The benchtop PSM0570 and JDR-520B run on single-phase power.
How thin can a pastry sheeter roll?
The Mecnosud sheeters adjust down to 0 mm and the Tyrone JDR-520B to 1 mm. Check each listing for the full thickness range.
Can I fold a sheeter away when not in use?
The Mecnosud PSM0570 benchtop sheeter has arms that fold for storage, which helps on a bench that is used for other work.