The tap over a commercial sink gets used hundreds of times a shift, often with wet, greasy or gloved hands, so the handle, spout and supply type matter more than they would anywhere else. This collection covers deck and wall-mounted faucets and a sink mixer for wash-up, prep and hand sinks. For pre-rinse units and rinsers, see our full commercial tapware range.
Choosing a commercial tap
Handle type
The handle decides how easily staff can use the tap mid-task. A wrist-action handle, as on the Sunmixer T20111, can be pushed on and off with a wrist or forearm. A top handle, as on the Sunmixer T20154, sits above the body so the bench either side of the spout stays clear. Two side handles, as on the Sunmixer T20138, control hot and cold separately.
Mixer or single supply
A mixer blends hot and cold to a set temperature. The HD4257 is a 330 mm high sink mixer with a 35 mm ceramic cartridge and a flow of 6 litres a minute. The Sunmixer T20139L and T20140L gooseneck faucets are single-supply taps that connect to either hot or cold water, not both, so they suit a single-purpose sink.
Deck or wall mounted
Deck-mounted taps fit through the sink or bench top; wall-mounted taps keep the deck clear and suit sinks against a wall. The T20139L is wall mounted and the T20140L is its deck-mounted equivalent.
What to check before you order
-
WaterMark certification. Plumbed fittings in Australian commercial premises must be WaterMark certified and installed by a licensed plumber.
-
Water efficiency. WELS ratings in this collection run from 4 star (T20154, T20138) to 5 star (T20111, T20139L, T20140L, HD4257).
-
Spout reach and height. A gooseneck or tall spout clears large pots; check the spout against the sink depth.
-
Tap holes. Match the tap's mounting to the holes in your sink or bench before ordering.
Pair it with one of our commercial stainless steel sinks. Popular models include the Sunmixer T20111 wrist-action faucet and the HD4257 330 mm sink mixer.
Frequently asked questions
Which tap is best for a commercial hand basin?
A tap that does not need clean hands to operate, such as a wrist-action tap. The Sunmixer T20111 has a wrist-action front handle that can be pushed on and off with the wrist or forearm.
What is the difference between a mixer and a single-supply tap?
A mixer blends hot and cold water to a set temperature. A single-supply tap, such as the Sunmixer T20139L or T20140L, connects to either hot or cold water only.
Should I choose a deck-mounted or wall-mounted tap?
Deck-mounted taps fit through the sink or bench top. Wall-mounted taps keep the bench clear and suit sinks against a wall. Check the mounting holes on your sink first.
What does the WELS star rating mean?
It is the Water Efficiency Labelling rating. More stars means lower water use for the same task. Taps in this collection are rated 4 or 5 stars.
Do commercial taps need a plumber to install?
Yes. Plumbed fittings in Australian commercial premises must be WaterMark certified and installed by a licensed plumber.