Watermark

WaterMark is the Australian certification scheme for plumbing and drainage products. A WaterMark approved tap has been tested and certified as suitable for connection to a water supply, which is why plumbers look for the mark before installing a tap in a commercial kitchen. This page covers WaterMark approved commercial tapware for kitchen sinks.

Modular Systems HD4257 sink mixer

The Modular Systems HD4257 is a 330 mm high commercial sink mixer, listed as WaterMark approved. It pairs a DR brass body with a 35 mm ceramic cartridge, mixing hot and cold water through a single lever. At 330 mm high it gives clearance to fill and rinse tall pots and jugs, which a low basin tap cannot.

Why WaterMark matters

In Australia, plumbing products connected to a water supply are generally required to carry WaterMark certification under the Plumbing Code of Australia, and a licensed plumber will usually decline to install an uncertified tap. Buying WaterMark approved tapware avoids a failed installation and a second order. Your plumber can confirm the requirements that apply to your site.

What to look for in commercial kitchen tapware

Commercial taps are used hundreds of times a day, so the cartridge and body matter more than the look. A ceramic cartridge resists wear and drips better than a washer, and a brass body stands up to constant use. Height and reach decide what fits under the spout: tall pots need a high spout, while a hand basin needs a short one. Lever handles are easier to work with wet or gloved hands than round handles.

Where the HD4257 suits

A tall mixer like the HD4257 suits prep sinks and pot sinks where staff fill stock pots, rinse produce and wash large trays. For a hand wash basin, a shorter or hands-free tap is usually the better choice, and for rinsing plates before a dishwasher, a pre-rinse spray tap does the job faster.

What to check before you order

  • Certification. Confirm the tap is WaterMark approved.
  • Height and reach. Check the spout clears your tallest pots and reaches the bowl.
  • Mounting. Check the tap suits your sink or bench mounting holes.
  • Installation. Have a licensed plumber install and connect the tap.

Browse commercial tap sets, pre-rinse spray taps and commercial hand wash basins, or the Modular Systems range. The Modular Systems HD4257 sink mixer is listed on this page.

Frequently asked questions

What is WaterMark?

The Australian certification scheme for plumbing and drainage products. A WaterMark approved tap has been certified as suitable for connection to a water supply.

Do commercial kitchen taps need to be WaterMark approved?

Plumbing products connected to a water supply are generally required to carry WaterMark certification in Australia. Your licensed plumber can confirm the requirements for your site.

How high is the Modular Systems HD4257 mixer?

It is 330 mm high, giving clearance to fill and rinse tall pots and jugs.

What cartridge does the HD4257 use?

A 35 mm ceramic cartridge in a DR brass body.

Which tap suits a hand wash basin?

A shorter or hands-free tap usually suits a hand wash basin better than a tall sink mixer.

1 Product