Benchstar Pro Commercial Smoothies Blender KS-10000

The Benchstar KS-10000 is a professional commercial smoothie blender with a 2-litre jug, speed control to 30,000 rpm and 185 pre-programmed blending modes selected from a large LCD screen. Tungsten steel blades on a stainless steel double bearing handle ice and frozen fruit without a plunger, and automatic shut-off protects the motor from overload. It carries a 2-year return-to-base warranty — the longest term on any Benchstar benchtop line.

Why operators choose the KS-10000

• 30,000 rpm with 185 pre-set blending modes — programme a drink once and every staff member reproduces it, which is what keeps a smoothie menu consistent
• No plunger needed — the blade and jug geometry pull product down on their own, so nobody is holding a tamper through every drink
• Tungsten steel blades — hold an edge through ice and frozen fruit far longer than standard stainless blades
• Stainless steel double bearing — the component that decides how long a high-rpm blender survives commercial duty
• Automatic shut-off for overload protection — the motor protects itself rather than burning out on a heavy load
• Large LCD screen — see the selected mode and progress rather than guessing from a dial
• 2 litre capacity — multiple serves per cycle for a queue rather than one drink at a time
• 2 year return-to-base warranty — double the term of most Benchstar benchtop equipment

Specifications

Venue suitability

The KS-10000 suits juice bars, cafes, gyms, clubs and hotels running smoothies, frappes and frozen drinks as a menu line rather than an occasional request. At 257 mm wide it fits a crowded counter, and a spare jug set (KS-10000-J) is available so a busy bar can swap rather than stop to wash.

Compare the full range of commercial bar blenders or see more from Benchstar.

Installation & delivery

It runs on a standard 240 V supply through a normal 10 A power outlet, so no dedicated circuit and no hard-wiring are needed. Allow 257 x 230 mm of bench and 517 mm of height with clearance above to lift the jug clear of the base. No plumbing is required. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 2-year return-to-base warranty — twice the term of most benchtop Benchstar lines, though the unit is returned for service rather than attended on site. See our warranty information page for full terms.

Frequently asked questions

Q: What does 185 blending modes actually give me? A: Pre-programmed cycles you select rather than judging by eye. Set a mode per drink on your menu and every staff member reproduces the same texture, which is the difference between a consistent smoothie line and a variable one.

Q: Do I need a plunger or tamper? A: No. Benchstar specifies that no plunger is needed — the jug and blade geometry draw product down without one, so staff are not holding a tamper through every drink.

Q: Does it need special wiring? A: No. It runs at 1.5kW, which sits comfortably within a standard 10A circuit.

Q: What warranty applies? A: Two years, return to base — double the term on most Benchstar benchtop equipment. Return to base means the unit is sent back for service rather than a technician attending on site.

Q: Can I get a spare jug? A: Yes. The KS-10000-J spare jug set is made for this blender, which lets a busy bar swap jugs and keep serving instead of stopping to wash, or keep dairy and allergen products separate.

Q: What warranty applies? A: Two years, return to base. That is a longer term than most Benchstar benchtop lines carry. Return to base means the item is sent back for service rather than a technician attending on site.