Anvil Heavy Duty Microwave 1800W

The Anvil MWA1800 is a heavy-duty commercial microwave delivering 1,800 W of output (IEC705) from a 3,000 W input. Both figures matter and they are different things: the output is what cooks, the input is what your circuit sees — and at 3 kW it needs a 15 A supply. It uses dual magnetron technology with twin motorised stirrer fans, which is how a commercial unit cooks evenly rather than leaving cold spots, and it is stackable.

Why operators choose the ICE-MWA1800

• 1,800 W output, 3,000 W input — the output figure is quoted to IEC705, the standard that makes microwave power ratings comparable between brands. Compare like with like: a unit quoting 1,100 W is usually quoting output too
• Dual magnetron with twin motorised stirrer fans — two sources and two stirrers is how you get even heating across an 18 litre cavity. Single-magnetron units leave cold spots, which in a commercial setting is a food-safety issue as much as a quality one
• 15 A supply required — 3 kW input is above what a standard 10 A power point carries. Confirm the outlet before delivery
• 100 preset programmable touch pads — program your menu once. On a machine used by rotating staff, presets are what keep the output consistent
• 3-stage heating and multiple quantity programming — vary power through a cycle, and scale a programme for two portions instead of one
• Variable power output 10 to 100 per cent — fine control rather than the handful of fixed steps a basic unit gives
• Full stainless inside and out with an easy-clean ceramic base — the ceramic base is the detail - it wipes rather than pitting, and there is no turntable to remove
• Stackable — two units in one footprint, which on a busy pass is the difference between one microwave and a queue
• 18 litre cavity, 330 x 310 x 175 mm internal — check your largest container against the internal height in particular

Specifications

Venue suitability

The MWA1800 suits cafes, pubs, clubs, aged care and any kitchen reheating to order. Dual magnetron and 1,800 W of output deliver both speed and evenness — and evenness is what matters when a reheat has to reach temperature all the way through.

See the full benchtop cooking range or browse every Anvil model we carry.

Installation & delivery

It needs a 15 A outlet. The 3 kW input draws about 12.5 A, above a standard 10 A point, so an electrician will need to fit one. Note the dimensions are recorded width x height x depth: 420 mm wide, 340 mm tall, 563 mm deep — it is considerably deeper than it looks. If you intend to stack two, remember each needs its own 15 A supply. Allow ventilation clearance around the cabinet. Our data records no weight.

Frequently asked questions

Q: What is the difference between 1,800 W output and 3,000 W input?

Output is the microwave energy delivered into the food; input is the electricity drawn from the wall. They are always different, and manufacturers sometimes quote whichever flatters. This unit states both, and the output figure is quoted to IEC705 - the standard that makes microwave ratings comparable. When comparing against another machine, make sure you are comparing output to output.

Q: Why does dual magnetron matter?

Even heating. A single magnetron plus one stirrer leaves cold spots, and in a commercial reheat that is a food-safety problem, not just a quality one - the centre of the portion may not reach temperature. Two magnetrons and two motorised stirrer fans distribute the energy far more evenly across the cavity.

Q: What electrical supply does it need?

A 15 amp outlet. The 3 kW input is about 12.5 A, more than a standard 10 A power point carries. If you are stacking two units, each needs its own 15 A supply - that is two circuits, not one.

Q: Will my containers fit?

The cavity is 18 litres at 330 mm wide, 310 mm deep and 175 mm high. The height is usually the limit - check your tallest container against 175 mm.

Q: Can it really be stacked?

Yes, the manufacturer lists it as stackable. That doubles throughput in one bench footprint. Plan the electrical supply for both units and keep ventilation clearance around the stack.

Q: What warranty does the ICE-MWA1800 come with?

Covered for 2 years on a return-to-base basis — the unit goes back for service rather than a technician attending site. Factor that into your downtime planning. Terms vary by product — see our warranty information page for full details.