Atosa Two Door Cooling Table EPF3422

The Atosa EPF3422 is a two-door refrigerated cooling table that pairs a 280 L cold store with a stainless steel work surface, holding -2 to +8 °C in ambient conditions up to 43 °C. At 1360 mm wide it gives a prep station its own refrigeration without adding a separate cabinet to the line.

Why operators choose the EPF3422

• Work surface plus 280 L of refrigeration — one footprint does prep bench and cold store, which is the point of a cooling table
• -2 to +8 degrees C working range — a true chilled holding band for proteins, dairy and prepped product
• Rated to 43 degrees C ambient — holds its band on a hot line rather than only in a cool room
• Stainless steel interior and exterior — a wipe-down prep surface and cabinet that survives daily service
• Fan-forced cooling with Aspera compressor — even temperature through the cabinet instead of warm spots
• Digital temperature controller — precise, readable control for food-safety record keeping
• Castors fitted as standard — roll the station out to clean behind it

Specifications

Venue suitability

Cooling tables suit any station where prep and cold storage happen in the same square metre — sandwich and salad benches, pizza make-lines, garde manger sections and bar prep. The EPF3422's 1360 mm width and 700 mm depth give a genuine working surface while keeping product beneath at a chilled holding band, which is what separates it from a plain undercounter fridge.

Compare the full range of under bench storage fridges or see more refrigeration from Atosa.

Installation & delivery

The EPF3422 is a self-contained plug-in unit drawing 300 W at 240 V, 50 Hz, so a standard outlet is enough. Leave ventilation clearance for the condenser and keep the unit clear of direct heat from cooking equipment. Check the 1360 mm width and 700 mm depth against your bench run and doorway access, and note the 119 kg net weight when planning the delivery path. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Covered by a 24-month (2-year) manufacturer-backed warranty on all parts and labour — see our warranty information page for the terms that apply.

Frequently asked questions

Q: What is the capacity of the Atosa EPF3422? A: It holds 280 litres behind two doors, under a stainless steel work surface.

Q: What temperature does it hold? A: It works between -2 and +8 degrees C, and is rated for ambient conditions up to 43 degrees C.

Q: What is the difference between a cooling table and an undercounter fridge? A: A cooling table is built to be worked on — it pairs refrigerated storage with a stainless prep surface at bench height, so one footprint serves as both prep station and cold store.

Q: What are the dimensions and weight? A: It measures 1360 mm wide x 700 mm deep x 838 mm high and weighs 119 kg net.

Q: What power does it need? A: 240 V, 50 Hz drawing 300 W at 2.5 A, as a self-contained plug-in unit.

Q: What warranty applies? A: It is covered by a 24-month (2-year) manufacturer-backed warranty on all parts and labour.