Benchstar Commercial Food Warmer with 15 Lamps – FW15L-183

The Benchstar FW15L-183 is a 1800 mm overhead food warmer with 15 commercial-grade heat lamps and stainless steel reflectors that spread heat evenly rather than leaving bright spots and cold gaps. Dedicated switches per tier hold different dishes at different temperatures across a +30 to +90C range, and the Montero/tungsten filament heating tubes reach temperature instantly. Built in corrosion-resistant 201 stainless steel, it runs at 2,700 W from a 15 A supply.

Why operators choose the FW15L-183

• 15 commercial-grade heat lamps — even coverage across the full 1800 mm shelf rather than hot spots and cold ends
• Stainless steel reflectors — direct the heat down onto the food instead of losing it upward, which is what keeps hold temperatures stable
• Dedicated switch per tier — hold chips hot on one level and something more delicate gently on another, from one unit
• Adjustable +30 to +90C — match the hold temperature to the dish rather than running everything at one setting
• Instant heat-up filament tubes — ready when service starts, with no warm-up window to plan around
• Holds texture, not just temperature — lamp heat keeps crisp product like chips and fried chicken crisp instead of steaming it soft
• 201 stainless steel housing — corrosion-resistant through the heat, steam and daily cleaning of a service line
• Largest in the range at 15 lamps — maximum coverage and lamp density — the only warmer here needing a 15 A supply

Specifications

Venue suitability

The FW15L-183 suits pubs, clubs, takeaway shops, food courts, canteens and carveries holding pizza, chips, fried chicken and buffet items at serving temperature. At 1800 mm wide and 975 mm tall it is one of the taller cabinets in the range — check headroom above your pass before ordering.

Compare the full range of hot food displays and bain maries or see more from Benchstar.

Installation & delivery

It draws its power through a 15 A outlet, not a standard 10 A one. The 15 A plug has a larger earth pin and will not fit a normal socket, so confirm a 15 A circuit is available at the install position or budget for an electrician to add one. Allow 1800 mm of width above the pass with clearance for the gantry uprights, confirm the 975 mm overall height clears any shelving or extraction above, and site it so staff can reach the shelves without reaching across the lamps. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 1-year parts and labour warranty — see our warranty information page for full terms.

Frequently asked questions

Q: How many lamps does the FW15L-183 have? A: 15 commercial-grade heat lamps, with stainless steel reflectors to spread the heat evenly across 1800mm.

Q: Can different levels be controlled separately? A: Yes. There are dedicated switches per tier, so one level can hold hot while another runs gently.

Q: What temperature range does it cover? A: +30 to +90C, adjustable to suit different dishes.

Q: Will it keep fried food crisp? A: Lamp heat holds crisp product like chips and fried chicken far better than a covered warmer, which traps steam and softens the coating. It holds cooked food at temperature; it does not cook or reheat from cold.

Q: Does it need a special power outlet? A: Yes. At 2,700W it needs a 15A outlet, which has a larger earth pin and will not fit a standard 10A socket. Confirm a 15A circuit is available or budget for an electrician to add one.

Q: What warranty applies? A: One year parts and labour.