Bezzera Modern 3 Group Ellisse Espresso Coffee Machine BZE2011S3E

The Bezzera Modern Ellisse BZE2011S3E is a 3-group volumetric espresso machine with the temperature of each group independently controlled by PID. PID is the important word: it holds a set temperature by continuously correcting, rather than switching a heater on and off around it, so shot-to-shot temperature is genuinely stable. It has a 17 litre boiler, 3 litres of frothing capacity with 20-second recovery, and a dual boiler probe system for safety and thermal stability.

Why operators choose the BZE2011S3E

• PID temperature control on each group independently — three groups, three separately held temperatures. Run a light single origin on one and a darker blend on another without either being a compromise
• 3 litres of frothing with 20-second recovery — this is the number that decides throughput on a milk-heavy menu. Recovery time, not group count, is what makes a queue
• 17 litre boiler — the reserve behind that recovery figure
• Dual boiler probe system — two probes give both a safety cut-out and better thermal stability - the manufacturer's own framing, and a sound one
• Automatic boiler refill with a safety cut-out — refills itself, and stops rather than continuing if something is wrong. On an unattended boiler that matters
• Large cup warming station above the unit — a warm cup is the cheapest improvement to an espresso there is, and the station is sized to actually hold a service's worth
• Fully flexible stainless steam and water arms — faster to work with on a busy bar than fixed wands
• Powder coated steel body — note this rather than stainless - a different finish and a different maintenance proposition from the stainless machines in the range
• 83 kg — a serious two-person lift onto a bar rated to carry it

Specifications

Venue suitability

The BZE2011S3E suits high-volume cafes, roasters, hotels and function venues where three groups are genuinely needed and per-group temperature control will be used. If your bar runs one blend all day, a machine without PID per group will serve you for less.

See the full commercial coffee machines range or browse every Bezzera model we carry.

Installation & delivery

This machine must be hard-wired or supplied on a dedicated high-current circuit by a licensed electrician — at 5,500 W it is far beyond a standard power point. Our recorded supply figures do not reconcile: the field reads 5,500 W with 15 A, and 5,500 W at 240 V single phase is about 23 A, not 15. Confirm the supply configuration with our team and your electrician before booking work — see the FAQ. Plumb it with filtration specified at the same time; water treatment is what protects a 17 litre boiler. At 83 kg it is a two-person lift, and at 960 mm it needs real bar length.

Frequently asked questions

Q: What electrical supply does it need?

We cannot give you a definitive answer from our data, and we would rather flag it than guess. The recorded field reads '5500W; 15A'. At 240 V single phase, 5,500 W is about 23 amps - not 15. The 15 A figure would fit a three-phase supply, but no voltage is recorded to confirm that. What is certain is that 5,500 W is well beyond a standard 10 A power point and needs a licensed electrician. Contact our team for the configuration before any work is booked.

Q: What does PID control actually do?

It holds a target temperature by continuously measuring and correcting, instead of switching a heater fully on and off around a set point. The practical result is that the twentieth shot is brewed at the same temperature as the first. With PID on each group independently, you can also run different coffees at their own optimal temperatures at the same time.

Q: What does '3 litres with 20 second recovery' mean?

It is the steam performance figure, and it is more useful than the boiler size alone. It means the machine can froth 3 litres of milk and be back to full steam pressure 20 seconds later. On a milk-heavy menu, recovery time is what determines whether a queue forms - not how many groups you have.

Q: What is the body made of?

Powder coated steel, which is worth knowing because several machines in the Bezzera range are stainless. Powder coat is durable and gives a colour finish; stainless is more forgiving of knocks and cleaning chemicals over a long life. Neither is wrong - it is a specification difference to be aware of.

Q: How does it compare with the Arcadia?

Both are Bezzera and both give per-group temperature control, but by different means and at different scales. This is a 3-group with PID per group, a 17 litre boiler and a powder-coated body. The Arcadia is a 2-group with individually adjustable group temperature plus customisable pressure profiling at each extraction stage, an 11 litre boiler and a stainless body. The Arcadia offers more control over the shot; this offers more capacity.

Q: What warranty does the BZE2011S3E come with?

Covered for 1 year parts only — labour is not included from day one, so allow for a technician's time in your own budgeting. Terms vary by product — see our warranty information page for full details.