Food Tek Insulated Ice Caddie CPWK112-6

The Food Tek CPWK112-6 is a 112 litre insulated ice caddie on castors, with a 600 x 430 x 435 mm interior. It is insulated, not refrigerated — no compressor, nothing to plug in. It holds ice for several days even in hot and humid conditions, with a drainage valve and plate keeping the ice clear of its own meltwater. Double-thickness food-grade polyethylene filled with polyurethane foam.

Why operators choose the CPWK112-6

• Keeps ice for several days, even in heat and humidity — the manufacturer's own claim and the whole point of the product - an insulated caddie is not a cooler bag, it is a multi-day ice store
• Drainage valve and plate keep ice and water separate — this is what extends ice life. Ice sitting in its own meltwater melts far faster, and the plate holds it clear of the water
• Double thickness PE filled with polyurethane foam — the foam core is where the insulation performance comes from - a single-skin tub will not hold ice overnight
• Food-grade polyethylene, and it leaves no taste or odour — relevant when the same caddie carries ice for drinks one day and product the next
• On castors — a full 112 litre caddie of ice is heavy - castors are the difference between wheeling it out and not using it
• Needs no power point — passive insulation, so it goes wherever the service is: outdoors, in a marquee, on a truck
• Designed to move and transport — this is built as a transport vessel, not a fixed store - fill at base and serve on site
• Interior dimensions published — 600 x 430 x 435 mm, so you can check what actually fits rather than working back from an external figure

Specifications

Venue suitability

The CPWK112-6 suits caterers, function venues, clubs, bars and event operators holding ice on site over multiple days. Its published interior dimensions make it the easier of the two CPWK112 models to plan around if you are fitting specific containers inside.

See the full ice tubs range or browse every Food Tek model we carry.

Installation & delivery

This unit needs no electrical supply. Nothing to install, plumb or plug in. Position it before filling — 24 kg empty plus 112 litres of ice is a substantial load, though it rolls on castors once filled. Draw meltwater off through the drainage valve rather than letting the ice stand in it.

Frequently asked questions

Q: Does the CPWK112-6 refrigerate?

No. It is a passive insulated vessel - no compressor, no power connection. It holds ice you have already made, and holds it for several days even in hot and humid conditions.

Q: What will actually fit inside?

The interior measures 600 x 430 x 435 mm. That is the figure to plan against if you are fitting bottles, containers or product inside rather than loose ice.

Q: Why does the drainage valve matter?

Ice sitting in meltwater melts much faster. The plate holds the ice clear of the water and the valve lets you drain it off, which is what delivers the multi-day performance.

Q: How does it compare with the CPWK112-22?

Both are stated at 112 litres. This model measures 790 x 600 x 740 mm externally and publishes a 600 x 430 x 435 mm interior; the -22 measures 820 x 560 x 730 mm and does not record an interior. If the internal fit matters, this is the one with the figures.

Q: Can it be used for product other than ice?

It is food-grade polyethylene and leaves no taste or odour, so yes. Follow your own food safety plan for temperature and holding times.

Q: What warranty does the CPWK112-6 come with?

Covered for 1 year, parts only — labour is not included. On a machine of this value that is worth budgeting for, because a service call is on you from day one. Terms vary by product — see our warranty information page for full details.