Fagor Kore 700 Benchtop Mild Steel Electric Griddle 800mm FT-E710L

The Fagor FT-E710L is an 800 mm-wide benchtop electric griddle from the Kore 700 series, its thick 12–15 mm smooth mild steel plate built for high-volume breakfast, burger and grill service in pubs, hotels and busy restaurant cooklines. A 10 kW, 415V three-phase element holds the plate anywhere between 100°C and 300°C under thermostatic control, and the deep-drawn AISI-304 stainless steel shell carries IPX5 water protection with a 137 kg net weight that keeps the unit planted through heavy service.

Why operators choose the FT-E710L

• 12–15 mm mild steel plate — thick, quick-heating fry-top welded to the shell for consistent searing and browning across the wide cooking surface.
• 10 kW three-phase heating — stainless steel elements with rapid reaction and recovery, so a loaded plate comes back to temperature fast.
• Thermostatic 100–300°C control — two front knobs with a separate safety thermostat for precise, protected running.
• Front grease chute and removable tray — the front-tilted surface channels fat into a collection tray that stores up to about 2 litres.
• Easy-clean deep-drawn shell — 1.5 mm AISI-304 stainless steel with rounded edges, hidden screws and IPX5 water protection.
• Front access to components — servicing without pulling the unit off the bench; optional anti-splash side and rear guards available.

Specifications

Venue suitability

The FT-E710L suits pubs, hotels, burger bars and high-output breakfast lines that need a full-width flat-top running multiple products at once — the 800 mm-wide unit gives room to work bacon, eggs, patties and toast across a single surface. For tight benchlines or lower volumes, the 400 mm FT-E705L delivers the same mild steel cooking character in half the width, while venues that prioritise the fastest clean-down can consider the chrome-plate FT-E710CL.

See the complete range of benchtop electric griddles or explore the wider Fagor range for matching Kore 700 modules.

Installation & delivery

The FT-E710L is hard-wired to a 415V three-phase plus neutral supply by a licensed electrician — it is not a plug-in appliance. Packed it measures 822 × 840 × 535 mm and weighs 155 kg, so plan door clearances and how you will move it into position before delivery day. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Warranty is 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice; see our warranty information for full details.

Frequently asked questions

Q: Mild steel or chrome — should I buy the FT-E710L or the FT-E710CL? A: Choose the FT-E710L when hard searing and browning is the priority — its 12–15 mm mild steel plate is built for burgers, steaks and big breakfast volume. The FT-E710CL swaps in a mirror-chrome plate that releases food more cleanly and wipes down faster between services. Both are 800 mm wide and run on 10 kW three-phase power.

Q: Is the FT-E710L gas or electric? A: Fully electric — 415V three-phase at 10 kW with stainless steel heating elements. The "NG" in some legacy listings is a naming artifact; no gas connection is involved.

Q: What are the dimensions and weight? A: The unit measures 800 × 730 × 290 mm (W×D×H) and weighs 137 kg net; packed for transport it is 822 × 840 × 535 mm at 155 kg.

Q: How is the temperature controlled? A: Thermostatically between 100°C and 300°C via two front control knobs, with a separate safety thermostat behind them.

Q: Is there a narrower version of this griddle? A: Yes — the FT-E705L is the 400 mm-wide mild steel model in the same Kore 700 series, rated at 5 kW on the same 415V three-phase supply.

Q: What warranty applies to the FT-E710L? A: 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice.