Fagor Kore 700 Bench Top Mild Steel Gas Griddle NG - FT-G710L

The Fagor FT-G710L is an 800 mm full-module benchtop gas griddle with a mild-steel fry-top, built for high-turnover cafes, burger bars, pubs, bistros and hotel cooklines that need fast, consistent heat across a wide plate. It runs 15 kW (50 MJ/h) across two independent burners with thermostatic control from 100 to 300°C, and a ceramic-stone shield over the burners keeps heat even across the full 800 mm surface. Electronic spark ignition lets it run on gas with no mains power.

Why operators choose the FT-G710L

• 15 kW (50 MJ/h) across two burners — high output with rapid reaction and recovery, so the plate holds temperature through back-to-back service.
• Two independent heat zones — hold eggs at a gentle heat on one side while searing patties hard on the other.
• Mild-steel fry-top — high heat retention for hard searing burgers, steaks and vegetables; season the plate for a durable non-stick layer.
• Thermostatic control 100–300°C — set a precise plate temperature instead of guessing, for repeatable results across the shift.
• Ceramic-stone burner shield — blocks fat drips onto the flame, prevents flare-ups and spreads heat evenly across the plate.
• Electronic spark ignition, no mains power — lights without a power connection, with a manual-ignition access tube as backup.
• 1.5 mm AISI-304 stainless body — laser-cut, welded and polished for a hygienic shell that wipes down quickly.
• Front-tilted plate with 2 L grease tray — channels fat and liquid forward into a removable tray for fast clean-down.

Specifications

Venue suitability

The 800 mm plate and 15 kW output suit high-turnover cafes, burger bars, pubs and bistros running breakfast and all-day griddle menus, where the two independent zones let a cook hold eggs gently on one side while searing hard on the other. It is a strong fit for hotel and function cooklines that need a full-module benchtop unit. Sites cooking a lot of eggs, fish or delicate items may prefer the clean-release chrome FT-G710CL, and tighter benches can step down to the 400 mm FT-G705L.

Compare it against the rest of our benchtop gas griddles or browse the full Fagor cooking line-up to match the right plate and width to your kitchen.

Installation & delivery

The FT-G710L connects to natural gas and must be installed and commissioned by a licensed gasfitter; electronic spark ignition means no power point is required. Allow clearance for the rear flue protector and front access for servicing. It packs to 822 × 840 × 535 mm at 168 kg. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Warranty is 2 years parts and labour, plus a further 2 years parts only when you register the product within 14 days of invoice; see our warranty information for full details.

Frequently asked questions

Q: How powerful is the Fagor FT-G710L? A: It delivers 15 kW (50 MJ/h) across two independent burners, with fast heat recovery between batches so the 800 mm mild-steel plate stays at working temperature through busy service.

Q: Does the griddle need an electrical connection? A: No. It uses an electronic spark igniter and runs without electricity, so it only needs a natural gas connection. A manual-ignition access tube is included as a backup.

Q: Can I control the plate temperature? A: Yes. It uses thermostatic control across a 100 to 300°C range, so you can set a precise, repeatable plate temperature rather than running flat out.

Q: What is the cooking surface made of? A: The fry-top is mild steel welded to a stamped 1.5 mm AISI-304 stainless body, with a ceramic-stone shield over the burners to block fat drips and spread heat evenly.

Q: How do I manage grease and clean it? A: The plate tilts towards the front so fat and liquids drain into a removable tray that holds up to 2 litres, and the rounded stainless edges with IPX5 rating make wash-down quick.

Q: What warranty does it come with? A: It is covered by 2 years parts and labour, plus a further 2 years parts only when you register the product within 14 days of invoice.