Fagor Kore 900 Series Electric 4 Burner With Oven C-E941

The Fagor C-E941 is a freestanding electric oven range from the Kore 900 Series that pairs four 4kW cast-iron hotplates with a full-size GN2/1 static oven, built for restaurants, hotels, pubs and catering kitchens that need rangetop and oven capacity in a single 800mm footprint. It runs on a 22kW 415V three-phase supply with a 2mm 304 stainless steel top, an oven thermostat spanning 125–310°C and IPX5 water protection (800 × 930 × 850 mm, 150 kg net).

Why operators choose the C-E941

• Four 300 × 300 mm cast-iron hotplates, 4kW each — fast, even heat for stockpots, sauté pans and continuous service.
• 7-position selector per plate — precise control from gentle simmer to full sear, plate by plate.
• Safety thermostat on every plate — guards against overheating through long shifts.
• GN2/1 static oven, 125–310°C — roast, bake and hold beneath the cooktop, with U-shaped tray guides in a stainless chamber.
• 6mm cast-iron oven floor — holds and radiates heat evenly for consistent baking results.
• 2mm 304 stainless steel top — heavy-duty, corrosion-resistant surface built for daily commercial use.
• All-electric, IPX5 rated — no gas connection required, and the housing stands up to wash-down cleaning.

Specifications

Venue suitability

The C-E941 suits restaurants, hotels, pubs and institutional catering kitchens that need both rangetop and oven capacity from one freestanding unit — and because it is fully electric, it fits sites where gas is unavailable or undesirable. The four independently controlled 4kW plates carry high-turnover service while the GN2/1 oven roasts and bakes below. It requires a hard-wired 415V three-phase supply, so it is not suited to venues limited to single-phase power.

Compare more units in our commercial ovens range or explore the full Fagor range.

Installation & delivery

The C-E941 requires a hard-wired 415V three-phase connection (22kW) installed by a licensed electrician. It ships as a tall crate at 1020 × 840 × 1130 mm, so check doorway width and height and arrange mechanical handling for the 150 kg unit before delivery. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Warranty is 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice; see our warranty information for full details.

Frequently asked questions

Q: Is the Fagor C-E941 gas or electric? A: Fully electric — all four hotplates and the oven are electrically heated from a 415V three-phase supply with a 22kW total load. There is no gas connection.

Q: What power supply does the C-E941 need? A: A hard-wired 415V three-phase supply (22kW, 3-phase + N) installed by a licensed electrician. It cannot run from a standard single-phase power point.

Q: How powerful are the hotplates? A: There are four 300 × 300 mm cast-iron hotplates, each rated at 4kW with its own 7-position power selector and an individual safety thermostat.

Q: What size pans does the oven take? A: The static oven chamber fits GN 2/1 gastronorm pans, with U-shaped tray guides and a thermostat adjustable from 125°C to 310°C.

Q: What are the dimensions and weight of the C-E941? A: The range measures 800 × 930 × 850 mm (W×D×H) and weighs 150 kg net, packing to 1020 × 840 × 1130 mm for transport.

Q: What warranty comes with the C-E941? A: 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice.