Fagor Kore 900 Series Electric Fry Top FT-E910L

The Fagor FT-E910L is an 800mm-wide electric fry-top griddle from the Kore 900 Series, built for high-volume breakfast, burger and grill service in hotels, pubs, clubs and busy cafes. A smooth 2mm 304 stainless steel plate sits over a 20mm mild-steel fry-top for rapid heat-up and fast recovery, with twin thermostat zones adjustable from 100–300°C and 15kW of 415V three-phase power behind them (800 × 930 × 290 mm, 137 kg net, IPX5 rated).

Why operators choose the FT-E910L

• Twin 100–300°C thermostat zones — run two temperatures side by side, holding eggs on one half while searing steaks on the other.
• Smooth 2mm 304 stainless plate — hard-wearing cooking surface that sears evenly and wipes clean between orders.
• 20mm mild-steel fry-top — thick plate mass delivers rapid temperature attainment and fast recovery between batches.
• 15kW three-phase heating — stainless-shielded elements keep the full 800mm plate at set temperature through peak service.
• Front fat collection — the plate tilts and funnels toward the front so fat and liquid drain into a storage tray.
• IPX5 water protection — rounded, funnelled housing with front component access for fast cleaning and servicing.
• Backed by warranty — 2 years parts & labour plus 2 years parts only, with registration within 14 days of invoice.

Specifications

Venue suitability

The FT-E910L suits hotels, pubs, clubs and high-output cafes running heavy breakfast, burger and grill service, where the twin thermostat zones let one cook hold delicate items while another sears at full heat. It needs a hard-wired 415V three-phase supply, so it is not suited to single-phase-only sites, and at 137 kg it should sit on a solid commercial bench or matching stand. Smaller kitchens that don't need the full 800mm plate may be better served by the 400mm FT-E905L from the same series.

Compare more units in our benchtop electric griddle range or explore the full Fagor range.

Installation & delivery

The FT-E910L requires a hard-wired 415V three-phase connection (15kW) installed by a licensed electrician. It packs to 1022 × 840 × 535 mm at 152 kg, so plan doorway access and mechanical lifting before delivery day. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Warranty is 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice; see our warranty information for full details.

Frequently asked questions

Q: Is the FT-E910L a griddle or a fryer? A: It is an electric fry-top griddle — food cooks on a flat, smooth 2mm 304 stainless steel plate. There is no oil tank, so it is not a deep fryer.

Q: What power supply does the FT-E910L need? A: A hard-wired 415V three-phase supply rated at 15kW (415V, 15kW, 3-phase + N), connected by a licensed electrician. It cannot run from a standard single-phase power point.

Q: How are the two cooking zones controlled? A: Each half of the 800mm plate has its own thermostat, adjustable from 100°C to 300°C, so you can run two different temperatures at once.

Q: Is there a narrower version of this fry top? A: Yes — the Fagor FT-E905L is the 400mm-wide sibling in the Kore 900 Series, with a single 7.5kW thermostat zone for smaller cooklines.

Q: How is fat and grease managed during service? A: The plate is tilted and funnelled toward the front, channelling fat and liquid into a collection opening that feeds a storage tray.

Q: What warranty does the FT-E910L come with? A: 2 years parts & labour plus 2 years parts only, with product registration within 14 days of invoice.