Fagor Kore 900 Series Gas Fry Top FT-G910L

The Fagor Kore 900 FT-G910L is a full-module gas fry-top griddle supplied in two gas-type builds — natural gas (FT-G910L-NG) or LPG (FT-G910L-LPG) — so you can match it to your site's supply. Both builds share the same hardware: two independent 735 × 640 mm mild-steel plate zones, 18.5 kW of heat, thermostatic control from 100 to 300°C and a 20 mm mild-steel plate on a 2 mm AISI-304 stainless top, built for high-volume breakfast, grill and a-la-carte service in cafes, hotels, pubs and busy restaurant cooklines.

Why operators choose the FT-G910L

• Natural gas or LPG builds — order FT-G910L-NG for mains natural gas or FT-G910L-LPG for bottled LPG — same griddle, matched to your supply.
• Dual 735 × 640 mm plate zones — a generous smooth cooking surface with two independent heat zones for cooking several orders at once.
• 18.5 kW output — high heat with electronic spark ignition and easy manual back-up on both gas builds.
• Thermostatic control 100–300°C — set-and-hold temperatures with rapid recovery between batches for repeatable results.
• 20 mm mild-steel plate — high heat retention for hard searing across the full surface; season the plate for a durable non-stick layer.
• 2 mm AISI-304 stainless top — laser-cut, welded and polished heavy-gauge construction built for continuous commercial use.
• Front fat collection — the plate tilts forward to a removable grease drawer for fast clean-down.
• IPX5 water protection — built to withstand wash-down cleaning in a busy commercial kitchen.

Specifications

Venue suitability

The FT-G910L suits cafes, hotels, pubs and high-turnover restaurant cooklines that need a dependable full-module fry-top for breakfasts, burgers, steaks and vegetables, with two independent zones so a cook can hold on one side and sear hard on the other. Choose the natural gas build for mains-connected kitchens and the LPG build for bottled-gas or mobile sites. Its 800 mm width and 18.5 kW output make it a primary griddle for busy service.

It sits within our wider range of benchtop gas griddles and the full Fagor cooking line-up when building out a matched kitchen.

Installation & delivery

Choose the FT-G910L-NG variant for natural gas or the FT-G910L-LPG variant for LPG; either way it must be connected by a licensed gasfitter, with clearance and ventilation per local code, and electronic spark ignition means no power point is required for the burners. It packs to 840 × 1022 × 535 mm at 172 kg. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Warranty is 2 years parts and labour, plus a further 2 years parts only when you register the product within 14 days of invoice; see our warranty information for full details.

Frequently asked questions

Q: NG or LPG — which variant do I order? A: Order the FT-G910L-NG build if your kitchen is on mains natural gas, or the FT-G910L-LPG build if you run bottled LPG. The two are the same griddle configured for different gas supplies — check your gas type before ordering, or ask your gasfitter.

Q: Are the natural gas and LPG builds otherwise identical? A: Yes. Both builds share the same 18.5 kW output, dual 735 × 640 mm plate zones, thermostatic 100–300°C control, 20 mm mild-steel plate on a 2 mm 304 stainless top, and 800 × 930 × 290 mm footprint — only the gas type differs.

Q: What is the cooking plate surface? A: A smooth fry-top plate made from 20 mm mild steel on a 2 mm 304 stainless top, offering two independent 735 × 640 mm heating zones.

Q: What temperature range does it reach? A: Thermostatic control holds the plate anywhere between 100 and 300°C, with rapid recovery between batches.

Q: How is fat and grease managed? A: The plate tilts toward the front, draining fats and liquids into a removable collection drawer for quick, hygienic cleaning.

Q: What warranty does it carry? A: It carries 2 years parts and labour, plus a further 2 years parts only when you register the product within 14 days of invoice.