ICE Stainless Steel 15 Tier GN Trolley TRS0015

The ICE TRS0015 is a single-column stainless steel racking trolley holding 15 x 1/1 gastronorm trays up to 65 mm deep, on runners set 80 mm apart. It is built from square tube stainless steel, runs on four castors with two lockable, stands 1735 mm tall on a 385 x 550 mm footprint and is supplied flat-packed. Cover is 12 months back to base.

Why operators choose the TRS0015

• 15 x 1/1 GN at 65 mm deep — the tray format and depth are both stated, which matters: at 80 mm runner spacing a 65 mm pan clears, but a 100 mm pan will not fit every slot
• 80 mm runner spacing — tight spacing is what puts 15 levels into 1735 mm. It is a high-density holding rack, not a general trolley
• 385 mm wide footprint — a single column of trays, so it tucks against a wall or into a prep bay. Its two-column sibling, the TRS2015, is 740 mm wide and takes 30 trays
• Square tube stainless steel — corrosion resistant and wash-down friendly, with square tube resisting racking under load
• Four castors, two lockable — rolls between prep, prover and cool room and then parks
• Flat-packed at 80 mm — the carton is 80 x 600 x 1620 mm — a genuinely flat pack, which is why freight on this trolley is cheap relative to its assembled size
• 12 months back to base — this is a service model, not just a duration. A back-to-base term means the unit goes to the service agent rather than a technician attending your site

Specifications

Venue suitability

Suited to bakeries, production kitchens, caterers and cook-chill operations that need to hold or move a run of gastronorm trays in a narrow footprint. Where you need twice the capacity in one trolley, the TRS2015 carries 30 trays in two columns at the same height.

See the full catering trolleys and racks range we carry.

Installation & delivery

Supplied flat-packed in an 80 x 600 x 1620 mm carton, so it fits through a standard doorway before assembly and needs putting together on site. No power or plumbing. Assembled it stands 1735 mm tall on a 385 x 550 mm footprint — check the ceiling and any doorway on the route once it is built, because assembled it no longer travels flat. The trolley weighs 18 kg empty; our records do not state a load rating per runner, so please ask us to confirm it if you are loading heavy wet product. Dispatched Australia-wide.

Warranty terms are per product — see our warranty information page.

Frequently asked questions

Q: What tray size does it take?

15 x 1/1 gastronorm trays up to 65 mm deep. The runners are 80 mm apart, so deeper pans will not fit every level.

Q: How is it different from the TRS2015?

Capacity and width. The TRS0015 is a single column of 15 trays on a 385 mm-wide footprint; the TRS2015 is two columns of 15, 30 trays in total, on a 740 mm-wide footprint. Both stand 1735 mm tall with 80 mm runner spacing.

Q: Does it come assembled?

No. It ships flat-packed in an 80 mm-thick carton, which is what keeps the freight cost down, and is assembled on site.

Q: What does back-to-base warranty mean?

If a warranty repair is needed, the trolley goes to the service agent rather than a technician attending your premises. It is a service model rather than a level of cover, and it is worth knowing before you buy.

Q: How much does each level hold?

Our records do not state a per-runner load rating for this model. We have not estimated one. Contact our team and we will confirm it with the supplier.

Q: Do the castors lock?

Two of the four castors lock.