Anvil VCT1001 Vertical Bun Toaster

The Anvil VCT1001 is a vertical conveyor bun toaster rated at 22 buns a minute — a genuine service-rate machine rather than a griddle someone has to watch. It has variable heating control from 50 to 300 °C, is adjustable for different bun thicknesses, and runs a heavy-duty stainless conveyor on precision cartridge bearings. The vertical, slim design is the point: it takes very little bench for the throughput. A teflon sheet is included.

Why operators choose the ICE-VCT1001

• 22 buns per minute — the figure that decides whether the toaster is your bottleneck. At a burger service that is roughly a bun every three seconds, which keeps ahead of most grills
• Vertical slim design — the buns travel vertically rather than along a bench, so the footprint is a fraction of a horizontal conveyor toaster at the same rate. On a crowded line that is the whole reason to choose this format
• Adjustable for various bun thicknesses — brioche, standard and slider buns all pass through properly rather than being crushed or dropped
• Variable 50 to 300 degrees C — the low end is a warming setting, the high end genuinely toasts. Most bun toasters give you one temperature
• Aluminium energy-efficient heating plate — aluminium conducts heat quickly to the plate face, so the machine gets to temperature and recovers between buns
• Precision cartridge bearing shafts — the conveyor bearings are the part that fails on cheap toasters. Cartridge bearings are a genuine specification
• Low noise operation — stated by the manufacturer, and relevant on an open pass where the toaster runs continuously
• Teflon sheet included — the consumable that keeps the belt clean is in the box
• Single feed design — one feed path, simple to operate and simple to clean

Specifications

Venue suitability

The VCT1001 suits burger bars, cafes, pubs, clubs and any operation toasting buns to order at volume. Its narrow 327 mm depth is what makes it practical on a crowded line where a horizontal conveyor toaster simply will not fit.

See the full conveyor toasters range or browse every Anvil model we carry.

Installation & delivery

It runs from a standard 10 A power point, so no electrical work is required. At 2.2 kW it draws about 9.2 A — inside a standard circuit, but close enough to it that it should not share one with other heating equipment. Dimensions are recorded width x height x depth: 702 mm wide, 568 mm tall, 327 mm deep. Allow clearance above for the feed and below or in front for buns to land. Keep the teflon sheet clean — it is what stops the belt picking up sugar from brioche. Our data records no weight.

Frequently asked questions

Q: How fast is 22 buns per minute in practice?

Roughly a bun every three seconds, which comfortably outpaces most grills. On a burger line the toaster is usually the bottleneck, so a rate this high means the pass is limited by the protein, not the bread.

Q: Why choose a vertical toaster over a horizontal conveyor?

Bench space. A vertical machine carries the buns up and over rather than along, so at the same throughput it takes a fraction of the depth - 327 mm here. On a crowded line that is often the difference between fitting a conveyor toaster and not having one.

Q: Will it handle brioche and thicker buns?

It is adjustable for various bun thicknesses, so yes within its range. Brioche also carries more sugar, which is why the teflon sheet supplied with it matters - keep it clean or the belt picks up caramelised sugar.

Q: Does it need special wiring?

No. 2.2 kW at 240 V draws about 9.2 A from a standard 10 A power point - though that is most of the circuit, so avoid sharing it with other heating equipment.

Q: What temperature should I run it at?

That depends on the bun and the belt speed, and the range is wide - 50 to 300 degrees C. The low end is a warming setting rather than a toasting one. Start in the middle of the range and adjust to your product.

Q: What warranty does the ICE-VCT1001 come with?

Covered for 12 months. Our records state the duration but not whether labour is included, so confirm the exact cover with our team before ordering rather than assuming it. Terms vary by product — see our warranty information page for full details.