Modular Systems 1200 mm Sink Bench Leg Bracing LB6-1200HS/1

The Modular Systems LB6-1200HS/1 is a leg bracing for an economic sink bench, recorded at 1090 mm wide and 490 mm deep and supplied flat packed. It is a structural accessory for a bench frame, not a free-standing item.

Why operators choose the LB6-1200HS/1

• Braces the leg frame - ties the legs together low on the frame, which is what stops a loaded bench racking sideways.
• Recorded 1090 mm x 490 mm - the two dimensions the supplier records - check them against your bench frame before ordering.
• Matched to the 1200 mm bench - the model code names the bench length. On the supplier's own figures the recorded width sits 110 mm inside that, and the recorded depth sits 110 mm inside a 600 mm bench depth. That is our arithmetic on the recorded numbers, not a supplier statement.
• Flat packed - the supplier records a packed size of 1300 x 650 x 80 mm, so it ships and stores flat.
• No height or weight recorded - the supplier records a zero against both, which is an empty field rather than a measurement.

Specifications

What the supplier record does not settle

The supplier supplies the same photograph for this product and for LB6-2400HS/1, LB6-1800HS/1 and LB6-1500HS/1, which are bracings of different lengths. Order to the recorded figures in the table above rather than to the image.

Venue suitability

Suited to commercial kitchens, prep areas and wash-up bays fitting out or reinforcing economic sink benches.

See the full Modular Systems range.

Installation & delivery

Supplied flat packed at a recorded 1300 x 650 x 80 mm and fitted to the bench frame on site. Confirm your bench model and frame dimensions before ordering, because the supplier publishes no compatible bench list against this SKU. Delivery is to a ground-floor loading point unless other arrangements are made at the time of ordering.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: Which bench does the LB6-1200HS/1 fit?

The supplier records it as a leg bracing for an economic sink bench and the model code names a 1200 mm bench. The supplier does not publish a compatible bench model list, so confirm your bench model and frame dimensions with our team before ordering.

Q: What are the recorded dimensions?

1090 mm wide and 490 mm deep. No height is recorded - the supplier's height field contains a zero, which is an empty field rather than a measurement, so we do not publish one.

Q: How much does it weigh?

The supplier records a zero net weight, which is an empty field rather than a measurement, so no net weight is published. Freight is calculated from the recorded packed size.

Q: How does it ship?

Flat packed, at a recorded packed size of 1300 x 650 x 80 mm.

Q: What warranty applies?

No warranty term is recorded against this SKU by the supplier. See our warranty information page for the terms that apply, and ask us if you need the term confirmed before ordering.