Modular Systems SSB6-1200L/A 1200mm left sink bench — front view in 304 stainless steel

Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.

Modular Systems 304 Grade Stainless Steel Single Left Sink Benches -Left Sink

Q: Is this bench fully assembled or flat-packed?

Flat-packed — which keeps freight cost down and lets us ship Australia-wide on a pallet. Assembly takes 20–30 minutes with the supplied tools and instructions.

Q: Can I swap the pot undershelf for a leg brace?

Yes — specify 'leg brace instead of pot shelf' in your order notes and we'll swap at no cost. Leg brace is better for pass-through storage; pot shelf is better for general kitchen storage.

In stock

SKU: SSB6-2400L/A

$1,266.50

$1,266.50 +GST -15% ~~$1,490.00~~

Size

1200(W) x 600(D) x 900(H)mm 1500(W) x 600(D) x 900(H)mm 1800(W) x 600(D) x 900(H)mm 2400(W) x 600(D) x 900(H)mm 1200(W) x 700(D) x 900(H)mm 1500(W) x 700(D) x 900(H)mm 1800(W) x 700(D) x 900(H)mm

Discover a lower price? Contact our team for a deal

Email 1300 000 927

From $1.48/day — for 12 months

Get approval in under 5 minutes Apply Now

Get Extra 11% OFF on Modular Systems! Use coupon: EXTRA11

Fast Delivery

Best Price

Australia-wide delivery

🖨️ Product Specification PDF

The Modular Systems SSB6-1200L/A is a 1200mm commercial single-sink bench with the bowl on the left, built from 304-grade (SUS304 18/8) stainless steel for food-safe, corrosion-resistant daily service. Shipped flat-packed to save freight and site-assembled in under 30 minutes with the supplied manual and tools. The integral pot undershelf doubles your usable storage; swap it for a free leg brace at order if you'd rather have pass-through access underneath.

Key features

1200mm width with left-side 400 × 400 × 300 mm bowl — standard footprint, works with 600mm-deep benchtops
304-grade stainless steel (1.2mm gauge) — fully welded and polished bowl; 18/8 corrosion-resistant
Integral pot undershelf (or free leg brace option) — doubles as pot storage; tell us which you want at order
150 mm bevelled splashback (40mm thick) — protects wall and fits tight to splash-backs
Adjustable S/S disc feet (42mm Ø legs, 1.2mm gauge) — level the bench precisely on uneven kitchen floors
Flat-packed for freight + assembly — significantly cheaper shipping than pre-assembled benches

Specifications

Specification	Value
Brand	Modular Systems
Model	SSB6-1200L/A
SKU	SSB6-1200L/A
Barcode	9354525001990
Width	1200 mm (this SKU) ⚠ listing shows dimension range 1200–2400mm — confirm this is the 1200mm variant only
Depth	600 mm
Height	900 mm
Bowl	Left-side 400 × 400 × 300 mm, 90 mm Ø drain hole
Material	304-grade stainless steel (SUS304 18/8), 1.2 mm gauge
Benchtop	1.2 mm SUS304, XPS-lined, ripple-surface finish
Splashback	150 mm high × 40 mm thick, bevelled
Legs	4 legs (6 on 2100/2400 models); 42 mm Ø, 1.2 mm S/S; adjustable disc feet
Undershelf	1.2 mm SUS304 pot undershelf (or leg brace by request)
Wet edge	15 mm
Packed dimensions	670 × 2470 × 530 mm
Warranty	2 years parts only
Shipping	Flat-packed; site-assembled with supplied manual and tools

Venue suitability

Suited to commercial kitchens, bars, cafés, butchers, bakeries, and back-of-house wash/prep stations where a single sink is enough. The left-hand bowl layout suits a left-to-right wash workflow (dirty in, clean out). Left-handed operators may prefer the right-sink variant.

Installation notes

Ships flat-packed. Assembly takes 20–30 minutes with the supplied tools. Plumb in with a 90mm drain fitting (not included). For wet areas, seal the back of the splashback against the wall with food-grade silicone. Adjustable disc feet level the bench against uneven floors — or upgrade to the optional lockable castor kit for a mobile unit.

What's in the box

1 × SSB6-1200L/A flat-packed bench (benchtop, bowl, legs, undershelf)
Instruction manual
Assembly tools
Fixing hardware

Delivery & warranty

Ships Australia-wide — palletised flat-pack freight. 2-year parts-only warranty from Modular Systems; labour costs for on-site warranty replacement are not included (which is standard for commercial stainless steel fit-out).

Frequently asked questions

Q: Is this bench fully assembled or flat-packed? A: Flat-packed — which is what keeps the freight cost down and lets us ship Australia-wide on a pallet. Assembly takes 20–30 minutes with the supplied tools and instructions. Two people make it easier but one person can manage.

Q: Can I swap the pot undershelf for a leg brace? A: Yes — specify "leg brace instead of pot shelf" in your order notes and we'll swap at no cost. Leg brace is better for pass-through storage (e.g. sliding a bin underneath); pot shelf is better for general kitchen storage.

Q: What are the sink bowl dimensions, and will a standard kitchen tap fit? A: The bowl is 400 × 400 × 300 mm (width × depth × height) with a 90mm Ø drain hole. Any standard pre-rinse or mixer tap fits through the back splashback. Depth is 300mm which handles large pots and sheet pans.

Q: Does the bench ship with taps or plumbing? A: No — the bench comes with the 90mm drain hole only. Taps, drainage fittings, and waste traps are supplied separately. Our commercial tap sets (/collections/commercial-tap-sets) match this bench.

Q: Is "2 years parts only" typical for commercial stainless benches? A: Yes — parts-only warranty is the industry standard for stainless steel fit-out (benches, sinks, shelving). Labour for on-site replacement isn't covered because stainless fit-out rarely fails in a way that needs factory-service intervention. Damage, rust from poor cleaning, and dent repairs are excluded.

Q: Can I add lockable castors to make it mobile? A: Yes — Modular Systems offer lockable castor kits that retrofit to the existing legs. Tell our sales team you want a castor kit when you order and we'll add it to the pick list.