Modular Systems Multipurpose Utility Bench With Sink SS6-2100R-H

The Modular Systems SS6-2100R-H is a 2100 mm multipurpose utility bench combining a 300 x 300 x 300 mm sink bowl with three drawers in 304-grade stainless steel. Unlike most of the Modular Systems range it arrives fully assembled rather than flat-packed — so there is no build time on site, but the access route needs checking, because at 2100 mm and 160 kg it will not come apart to fit through a tight doorway.

Why operators choose the SS6-2100R-H

• Sink and three drawers in one 2100 mm bench — wash point, tool storage and working surface in a single unit rather than three
• 300 x 300 x 300 mm bowl — a deep cube bowl that takes a full-size container upright, not a shallow hand-wash basin
• Arrives fully assembled — no build time on site — but it also cannot be broken down for access, so measure the route
• 304-grade stainless steel — the grade used through commercial kitchens for corrosion resistance and cleanability
• 610 mm depth at 900 mm bench height — standard commercial geometry, so it lines up with an adjoining bench run
• Hygienic, easy-clean surfaces — wipes down rather than needing to be scrubbed into corners
• Three drawers rather than an open undershelf — tools and small equipment stay out of the splash zone beside a sink
• 160 kg of stainless — the mass that keeps a 2100 mm bench rigid in daily use

Specifications

Venue suitability

The SS6-2100R-H suits kitchens needing a wash point and storage in the same run — prep areas, bar backs, coffee stations and service corridors. It is the utility bench you put where a sink alone would waste the surrounding space.

Compare the full range of commercial stainless steel sinks or see more from Modular Systems.

Installation & delivery

It arrives fully assembled rather than flat-packed, so measure the access route before delivery — a 2100 mm bench at 160 kg will not come apart to fit through a narrow doorway or a tight stair. The bowl needs a waste connection and a tap, so a licensed plumber should make the water connections. There is no electrical work. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 2-year parts only warranty — labour is not included. See our warranty information page for full terms.

Frequently asked questions

Q: Does the SS6-2100R-H arrive assembled? A: Yes. Unlike most of the Modular Systems bench range it comes fully assembled, so there is no on-site build — but it also cannot be dismantled to fit a tight access route. Measure your doorways before delivery.

Q: What size is the sink bowl? A: 300mm wide, 300mm deep and 300mm high — a cube bowl deep enough to stand a full-size container in, rather than a shallow basin.

Q: How many drawers does it have? A: Three, which keeps tools and small equipment out of the splash zone next to the sink.

Q: What does installation involve? A: A waste connection and a tap for the bowl, so a licensed plumber should make the water connections. There is no electrical work — the bench is unpowered.

Q: Can it be dismantled to fit through a doorway? A: No. It arrives welded and fully assembled, so it cannot be broken down for access. At 2100mm and 160kg that makes the delivery route the thing to check first.

Q: What warranty applies? A: Two years parts only. Labour is not covered, which is worth factoring in when budgeting for service on a fabricated item.