Nemco NES1001 Portable Base Table for Easy Slicer

The Nemco NES1001 is a portable base table, and the supplier records it as suiting the Nemco NES0001 Easy Slicer. It is an accessory rather than a machine: it gives the slicer a stable, movable platform so the unit can be set down, used and lifted away without being bolted to a bench. At 500 x 340 x 60 mm and 3 kg it is a low, flat plate rather than a stand of any height.

Why operators choose the NES1001

• Recorded fitment: the Nemco NES0001 Easy Slicer — the supplier names that model specifically. We have not published a fitment to any other machine, because none is recorded against this part
• A platform, not a stand — at 60 mm tall this sits the slicer just clear of the bench. It does not raise the machine to a working height, so do not buy it expecting a floor or bench stand
• 500 x 340 mm plate — larger in plan than the NES0001 slicer's own 280 x 200 mm footprint, which is what gives the assembly its stability in use
• Portable at 3 kg — the whole point of the part. The slicer and base move together to wherever the job is, then come off the bench entirely
• Accessory, sold separately — it is not supplied with the NES0001 and the slicer works without it
• Nothing to connect — a passive part with no power, no moving components and no services of any kind

Specifications

Venue suitability

For any kitchen already running, or about to buy, the Nemco NES0001 Easy Slicer and wanting it on a movable platform rather than fixed to one spot - a catering operation working several stations, a venue that clears its benches between services, or a kitchen short enough on bench space that equipment has to come out and go away again.

See the full manual veg prep machines range we carry, or browse all commercial food preparation equipment.

Installation & delivery

Nothing to install and nothing to connect. Allow 500 x 340 mm of bench for the plate itself, plus the working clearance the slicer sitting on it needs. It adds 60 mm of height under the machine, so add that when you check overhead clearance. Our records show this part suiting the NES0001 Easy Slicer and no other model — if you want to use it under a different machine, check with our team first rather than assuming it fits. Dispatched Australia-wide.

Recorded as suiting the Nemco NES0001 Easy Slicer, sold separately.

Warranty terms are per product — see our warranty information page.

Frequently asked questions

Q: What does this fit?

The supplier records it as suiting the Nemco NES0001 Easy Slicer. That is the only fitment recorded against this part, so it is the only one we will state. If you are hoping to use it under another machine, ask our team and we will check rather than guess.

Q: Is it included with the NES0001 slicer?

No. It is a separate accessory. The NES0001 works on a bench without it.

Q: Does it raise the slicer to a working height?

No. It is 60 mm tall - a low platform, not a stand. It gives the machine a stable, movable base rather than lifting it to a new height.

Q: Why would I buy one?

If the slicer needs to move. The base lets the machine be set down, used and carried away as one unit, which suits a kitchen that clears its benches or works across several stations. If your slicer lives permanently in one place, you probably do not need it.

Q: Does it need power?

No. It is a passive part with no motor and no moving components.

Q: What warranty does it carry?

Twelve months, back to base, the same term as the rest of the Nemco range we carry. Full terms are on our warranty information page.