PakMax 117 mm PET Outer-Fit Deli Lid OF-117C-PET-LID Carton of 500

The PakMax OF-117C-PET-LID is a clear PET outer-fit flat lid with a recorded 117 mm base and a height of 15 mm, supplied in a carton of 500. The supplier states that it fits the PakMax 117 mm PET deli containers, and records it at -20 to +60 degrees C.

Why operators choose the OF-117C-PET-LID

• Fits the PakMax 117 mm PET deli containers - the supplier names the host range; this listing is the lid only
• 117 mm base - the lid's own recorded size
• 15 mm high - the outer-fit flat profile, recorded by the supplier
• Clear PET (polyethylene terephthalate) - the contents stay visible, which is what a chilled grab-and-go shelf sells on
• Rated -20 to +60 degrees C - recorded against this lid specifically - the coldest-rated item in this PakMax range
• 500 per carton - the carton count is the same across every product in this range
• Recyclable - the supplier's own wording
• Colour recorded as Clear - the supplier's own wording
• Outer-fit design - the supplier describes it as seating over the rim of the container rather than inside it, for a flush finish
• Flat profile at 15 mm - the shallower of the two 117 mm lids, so filled containers stack closer together

Specifications

Venue suitability

Suits salad bars, deli counters, dessert and fruit displays, grab-and-go chillers, caterers and delivery kitchens closing a chilled PET deli container for transport.

See the full PakMax range.

Installation & delivery

Nothing to install - this is a single-use disposable supplied as a carton of 500. The carton measures 615 x 240 x 350 mm with a gross weight of 3.5 kg. Freight on a light, bulky carton like this is calculated on its cubic volume rather than its gross weight, so the shipping weight shown at checkout is the higher of the two. Store flat and dry.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: What does it fit?

The supplier states that it fits the PakMax 117 mm PET deli containers, and records a 117 mm base on this lid. That host range is a different product line from the PakMax kraft paper deli containers, which record 115 mm and 96 mm tops and take their own paper lids - a 117 mm PET lid is not a substitute for those, and we have not claimed a fit the supplier does not state. Ask our team to quote the matching containers alongside the lids so you order a matched set.

Q: What does outer-fit mean?

It seats over the outside of the container rim rather than dropping inside it, which is what gives the flush, finished look the supplier describes. The practical consequences are that the closed unit is very slightly wider than the container alone, and that a lid designed to fit outside a rim is not interchangeable with one designed to fit inside it even at the same nominal diameter. The supplier lists a separate flat lid for this container range alongside this outer-fit one, so check which of the two your operation is set up for and ask our team if you are unsure.

Q: How is this different from the other 117 mm PET lid?

The profile and the headroom. This one is the outer-fit flat at 15 mm high; the DL-117C-PET-LID is the dome at 40 mm high. Both record a 117 mm base, both are clear PET, both are rated -20 to +60 degrees C and both come 500 to a carton, so the choice is entirely about what goes in the container and how it is displayed rather than about fit or temperature.

Q: How hot can it be used?

This lid is recorded at -20 to +60 degrees C, and the supplier describes it as ideal for cold food packaging - salads, desserts, fruit and pre-prepared meals. That is the lowest upper limit of anything in this PakMax range, where the paper lids are recorded at +90 and +120 degrees C. On any sealed assembly it is the lower-rated component that governs, so a PET lid sets the ceiling for whatever it is paired with. It is not a hot-fill lid.

Q: Is this lid FSC certified?

The supplier records an FSC certification against this lid and we have published it exactly as recorded. We want to be straight with you about it, though: FSC certifies forest and plant fibre, and this lid is PET, which contains none. We have flagged the record with the supplier. If FSC certification is part of your own compliance or tender documentation, do not rely on this line - ask our team and we will get the certificate or a correction from the supplier before you commit.

Q: How many does a carton hold, and what does it weigh?

Five hundred lids per carton, at 615 x 240 x 350 mm with a gross weight of 3.5 kg. Freight on a light, bulky carton like this is charged on cubic volume rather than gross weight, so the shipping weight shown at checkout is the higher of the two figures.

Q: How many photographs are there?

One. The supplier publishes a single image for each of the two 117 mm PET lids, where the paper products in this range carry three each. It was downloaded, hashed and viewed at full size before being attached, and it shows a clear PET lid of the profile described. We have asked the supplier for a fitted shot, because how a lid seats is the thing a photograph is most useful for. Ask our team if you would like a sample.

Q: Are the recorded dimensions the item or the carton?

The carton. The Width, Depth and Height recorded against this product match the carton size stated in the supplier description exactly, which is how we can say it with certainty rather than assuming it. The item's own size is published separately in the specifications above. Use the carton figures for storage and freight planning, not for portion planning.

Q: What warranty applies?

No warranty term is recorded against this SKU by the supplier. That is not unusual for a single-use disposable, and we have not borrowed a term from a sibling product. See our warranty information page, or ask our team if you need something in writing.