PakMax 90 mm Flat Cold Cup Lid CCFL-90C-PET-LID Carton of 1000

The PakMax CCFL-90C-PET-LID is a clear PET flat lid recorded to a 90 mm cup rim, supplied 1000 to the carton. The supplier records a working range of -20 degrees C to +60 degrees C.

Why operators choose the CCFL-90C-PET-LID

• Flat profile - gives a low, stackable profile for transport and delivery.
• 90 mm fitment - the recorded cup-rim diameter this lid is matched to - order lids to the rim, not the cup capacity.
• Clear PET - keeps the drink visible through the lid for counter presentation.
• Carton of 1000 - a single ordering unit sized to match the cup cartons.
• Recorded range - the supplier records -20 degrees C to +60 degrees C.

Specifications

What the supplier record does not settle

The supplier records a 44 mm height for this flat lid and the identical figure for the sip-through lid in the same range, while recording 10 mm for the dome. A flat lid cannot equal a sip-through to the millimetre and a dome cannot be the shortest of three. No lid height is published on any of the three.

The supplier supplies the same photograph for this product and for CCFL-78C-PET-LID, which are a lid of a different diameter. Order to the recorded figures in the table above rather than to the image.

Venue suitability

Suited to cafes, juice and smoothie bars, takeaway counters and delivery kitchens sending cold drinks out of the venue.

See the full PakMax range.

Installation & delivery

Supplied as a sealed carton and ready to use - no installation is required. Store the carton off the floor and out of direct sunlight, and rotate stock so older cartons are opened first. Delivery is to a ground-floor loading point unless other arrangements are made at the time of ordering.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: Which cups does the CCFL-90C-PET-LID fit?

The supplier records a 90 mm fitment, so it is matched to cold cups with that rim diameter. Rim diameter is the only reliable way to match a lid to a cup - two cups of different capacity often share one rim, and two cups of the same capacity may not.

Q: Why is no lid height shown?

The supplier records a 44 mm height for this flat lid and the identical figure for the sip-through lid in the same range, while recording 10 mm for the dome. A flat lid cannot equal a sip-through to the millimetre and a dome cannot be the shortest of three. No lid height is published on any of the three.

Q: How many lids are in a carton of CCFL-90C-PET-LID?

1000 per carton, in a carton measuring 480 x 196 x 490 mm at 3.0 kg gross.

Q: What is the lid made from?

PET plastic, recorded by the supplier as recyclable.

Q: Is this lid certified?

The supplier records an FSC certification against this product. FSC certifies forest fibre and this item is moulded plastic, which contains none, so we publish the certification exactly as the supplier records it rather than asserting it ourselves. If the certification matters to your procurement, ask us and we will take it up with the supplier.