PakMax Lid for LT-51 5 Compartment Lunch Tray LT-51-LID Carton of 300

The PakMax LT-51-LID is a snap-fit lid for the LT-51 five-compartment lunch tray, recorded at 290 x 229 mm with a 14 mm height and supplied in a carton of 300 - the same carton quantity as the tray itself. It keeps a multi-section meal contained through storage, transport and service.

Why operators choose the LT-51-LID

• Fits the PakMax LT-51 five-compartment lunch tray - sold separately; both the lid and the tray are supplied 300 to a carton, so one carton of each pairs up exactly
• 290 x 229 mm, 14 mm high - a low-profile lid - it adds very little to the stacked height of a filled tray, which matters when a meal-prep run is racked
• Keeps the compartments separated in transit - the whole point of a five-section tray is lost if the meal moves, and the lid is what stops it
• 300 lids per carton - recorded explicitly by the supplier, and it matches the LT-51 tray
• Natural off-white finish - the recorded colour
• Material is not recorded for this lid - FED publishes no material against it - see the FAQ

Specifications

Venue suitability

Suits caterers, meal-prep operations, schools and takeaway kitchens sending out plated multi-section meals.

See the full PakMax range.

Installation & delivery

Supplied as a carton of 300. The carton measures 425 x 290 x 470 mm with a gross weight of 10.1 kg. Freight on a light, bulky carton like this is calculated on its cubic volume rather than its gross weight, so the shipping weight shown at checkout is the higher of the two. Store flat and dry.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: What is this lid made from?

The supplier records no material for it. That is an absence rather than a contradiction, and we have not filled it in. The recorded colour, Natural Off-White, matches the bagasse products in this range and not the clear PET lids, which points to a fibre lid - but that is our reading of the colour field, not a recorded fact. If your disposal route or an environmental claim depends on it, ask our team and we will confirm with the supplier before you order.

Q: Is it FSC certified?

The supplier records an FSC certification against it and we have published that as recorded. The honest caveat is that the material is not recorded, so we cannot tell you which fibre the certification covers. That is different from the clear PET lids in this range, where an FSC claim is impossible and we have removed it.

Q: What size is the LT-51 tray it fits?

This is worth stating carefully because the two records disagree about which measurement is whose. The supplier describes the lid as fitting LT-51 trays of 290 x 229 mm, and 290 x 229 mm is also this lid's own recorded unit dimension. The LT-51 tray page records the tray top at 281 x 221 mm. Our reading is that 290 x 229 mm is the lid and 281 x 221 mm is the tray, which is the right way round for a lid that sits over a tray - but we have published both figures rather than resolve it for you.

Q: How many lids come in a carton?

300. The carton measures 425 x 290 x 470 mm and has a gross weight of 10.1 kg. The LT-51 tray is also 300 to a carton, so the two order one for one.

Q: What warranty applies?

No warranty term is recorded against this SKU by the supplier. That is not unusual for a single-use disposable, and we have not borrowed a term from a sibling product. See our warranty information page, or ask our team if you need something in writing.