Pull down heat lamp Antique Copper HYWAL04

This pull-down heat lamp has a 175 mm antique copper shade on an adjustable drop, extending from 600 mm to 1500 mm so it can be set at the right height over a pass, buffet or carvery. An on/off switch sits on the shade itself, and it runs at 250 W from a standard 240 V supply. Important: heat lamps must be installed by a certified electrician — failure to do so will void the warranty.

Why operators choose the HYWAL04

• Drop adjustable 600-1500 mm — set the lamp at the right height above a pass, buffet or carvery instead of accepting a fixed drop
• 250 W rated fixture — sized for a single plating or carving position rather than a whole counter run
• On/off switch on the shade — the control is where the operator already is, rather than on a distant wall switch
• 175 mm antique copper shade — directs heat down onto the plate and suits a front-of-house finish
• 2 kg unit weight — light enough for a straightforward overhead installation by an electrician
• 250 W on a 10 A supply — a low electrical load for holding a single plating or carving position
• Single-position focus — concentrates heat where plates actually sit rather than heating a whole counter run
• Certified electrical installation — the fixed installation is done properly by a licensed electrician, which is also what keeps the warranty intact

Specifications

Venue suitability

This heat lamp suits restaurants, hotels, function venues, carveries and buffet lines needing a single heated plating or carving position. Because it is a fixed overhead installation requiring a certified electrician, settle its position with the pass layout finalised rather than planning to move it later.

Compare the full range of commercial heat lamps and food warmers or see more from Benchstar.

Installation & delivery

Heat lamps must be installed by a certified electrician. Installing it any other way will void the warranty. This is a fixed overhead electrical installation, so confirm the mounting point will carry the unit and set the drop — anywhere between 600 mm and 1500 mm — to clear staff working beneath it. The lamp runs at 250 W on a standard 240 V, 10 A supply. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 12-month return-to-base warranty — the unit is returned for service rather than attended on site. See our warranty information page for full terms.

Frequently asked questions

Q: Can I install this heat lamp myself? A: No. Benchstar states that heating lamps need to be installed by a certified electrician, and that failure to do so will void your warranty. This is a fixed overhead electrical installation.

Q: What happens to the warranty if it is not professionally installed? A: The warranty is voided. The manufacturer's condition is explicit: installation by a certified electrician is required for the warranty to remain valid.

Q: Is a globe supplied with it? A: Our product data for this model does not state that a lamp is included — it records the 250W rating of the fixture itself. Please confirm with our team before ordering if you need the globe supplied.

Q: How far down does it extend? A: The drop is adjustable from 600mm to 1500mm, so the lamp can be set at a workable height above a pass, buffet or carvery.

Q: Where is the on/off switch? A: On the lamp shade itself, so the control is at the point of use rather than on a remote wall switch.

Q: What warranty applies? A: Twelve months, return to base. The unit is returned for service rather than a technician attending on site — reasonable on a benchtop appliance you can transport, but worth factoring into downtime planning.