Sunmixer Milk Jug Rinser Counter Top Model T9860-B

The Sunmixer T9860-B is a counter-top milk jug rinser for busy coffee service — a high-pressure spray that clears a jug between pours so a barista is not walking to the sink. Its 304 stainless steel rinse sink uses an internal round-corner design so there are no square corners for milk residue to build up in, and it is WaterMark certified, which is what allows a compliant plumbed installation in Australian commercial premises.

Why operators choose the T9860-B

• Keeps the barista at the machine — rinsing in place between pours is the whole point — walking to the sink is the workflow cost this removes
• WaterMark certified — required for a compliant plumbed installation in Australian commercial premises, and not every imported rinser has it
• Internal round-corner sink design — no square corners for milk residue to lodge in, which is what keeps a dairy-contact fitting hygienic
• 304 stainless steel rinse sink — the food-contact grade, and it survives constant water and milk exposure
• Glass rinser with base included — handles glassware as well as milk jugs from the same fitting
• G1/2 install connection — a standard connection size, so a plumber can fit it without adapting
• Rated to 85C working temperature — takes hot water rather than being limited to cold rinsing
• Compact 175 x 165 mm footprint — fits into a crowded coffee bench where nothing else will

Specifications

Venue suitability

The T9860-B suits cafes, coffee shops, hotels, clubs and any bar pulling milk drinks at volume. It is a fitting rather than an appliance — there is nothing to plug in — so the decision is about bench space and getting a plumber to make the connection.

Compare the full range of jug and cup rinsers or see more from Sunmixer.

Installation & delivery

There is no electrical work: it is a plumbed fitting with no power connection. It uses a G1/2 install connection at a safety pressure of 0.4 MPa and is rated to an 85C working temperature. Because it is WaterMark certified it can be installed compliantly in Australian commercial premises — have a licensed plumber make the connection and confirm your supply pressure sits within the stated range. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Backed by a 12-month parts only warranty — labour is not included. See our warranty information page for full terms.

Frequently asked questions

Q: Is the T9860-B WaterMark certified? A: Yes. That certification is what allows a compliant plumbed installation in Australian commercial premises, and it is worth confirming on any imported plumbed fitting.

Q: Does it need power? A: No. It is a plumbed fitting with no electrical connection — only a water supply via a G1/2 connection.

Q: What water pressure does it need? A: It is rated at a safety pressure of 0.4 MPa with a hyper pressure scale of +/- 10, and a working temperature up to 85C. A plumber should confirm your supply sits within that range.

Q: Can it rinse glassware as well as milk jugs? A: Yes. A glass rinser and base are supplied with the unit.

Q: Why does the round-corner sink design matter? A: Milk residue collects in square internal corners and is difficult to clear. A round-corner interior is what makes a dairy-contact fitting practical to keep clean.

Q: What warranty applies? A: Twelve months parts only. Labour is not covered under this warranty.