Thermaster 600L Chest Freezer With Stainless Steel Lid BD600F

The Thermaster BD600F is a 600-litre heavy-duty chest freezer built for commercial venues that need bulk frozen storage with easy visual product check and robust daily handling. The stainless steel hinged lids stand up better than glass or plastic lids in back-of-house environments, and the R290 natural refrigerant delivers strong pull-down performance (down to -22°C) with a low environmental footprint. Designed for supermarkets, butchers, catering kitchens, and hospitality cold rooms that need reliable long-term bulk freeze.

Key features

• 600L capacity with 6 removable baskets (570 × 225 × 170 mm each) — organised bulk freeze without stacking
• 304 stainless steel hinged lids — tougher than glass display lids, suited to heavy back-of-house use
• R290 natural refrigerant — low GWP, strong pull-down to -22°C, energy-efficient compressor
• Digital temperature control with LED interior light — easier stock checks and temperature setting
• Dual lid design (2 lids) — access either half without warming the full cabinet
• Castors fitted — reposition the unit for cleaning or layout changes without removal
• 10A single-phase plug-in — no electrician required; runs on a standard commercial power point

Specifications

Venue suitability

Suited to supermarkets, IGAs, butcher shops, seafood wholesalers, catering kitchens, clubs, and function venues needing bulk frozen storage. The 1800 mm width is compatible with most back-of-house and retail dry-store layouts. The stainless lid is preferred over glass where food-safe durability matters more than product visibility.

Installation notes

The BD600F runs on a standard 10A single-phase outlet — no special electrical work required. Allow at least 50 mm clearance at the back and sides for ventilation. Manual defrost is required periodically; the drain plug is accessible from the base of the unit.

What's in the box

• 1 × Thermaster BD600F chest freezer
• 6 × removable wire baskets
• Manufacturer documentation + warranty card

Delivery & warranty

Ships Australia-wide on pallet freight. Warranty: 2 years parts & labour as standard, extended to 4 years parts only when the product is registered within 14 days of invoice. Claims handled through our Granville NSW base.

Frequently asked questions

Q: What's the difference between a stainless steel lid and a glass lid chest freezer? A: Stainless steel lids are tougher, better-insulated, and cheaper to replace if damaged — ideal for back-of-house use. Glass lids let staff or customers see contents without opening the lid, which reduces temperature loss but costs more and is easier to chip. The BD600F has a 304 stainless steel hinged lid, best suited for bulk storage rather than customer-facing display.

Q: Is R290 refrigerant safe for commercial kitchens? A: Yes — R290 (propane) is a natural refrigerant used in a small hermetically-sealed charge. It meets Australian commercial refrigeration safety standards, has a very low global warming potential, and delivers better energy efficiency than older refrigerants like R404A. No special install requirements for a unit this size.

Q: Does the BD600F run on standard Australian power? A: Yes. It plugs into a standard 10A single-phase power outlet (240V) and draws 270W. No electrician is required for installation.

Q: How many frozen products can it hold? A: The 600L gross capacity fits approximately 6 full removable baskets (each 570 × 225 × 170 mm) plus bulk stack space below. Real-world capacity depends on packaging, but a typical butcher or small supermarket uses this for 400–500 kg of frozen product per cabinet.

Q: How much floor space does it need? A: The unit is 1800 mm wide × 792 mm deep × 873 mm tall. Allow an extra 50 mm at the back and sides for ventilation, and about 900 mm of clearance in front so both lids can open fully. Overall footprint: plan for 1900 mm × 900 mm floor space.

Q: What's covered by the warranty? A: Standard cover is 2 years parts and labour. Register the product within 14 days of invoice for a further 2 years parts only — giving a total 4-year parts warranty. Warranty claims are handled through our Granville NSW base; local stock of Thermaster parts means fast turnaround on common repairs.

Related

• Browse all commercial chest freezers
• See the full Thermaster range