Asber GE-H500DD passthrough hood-type dishwasher — front view

Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.

Asber Tech Line Pass-through Hood Type Dishwasher - GE-H500DD

Name: Asber Tech Line Pass-through Hood Type Dishwasher - GE-H500DD
Brand: Asber
Price: 6111.0 AUD
Availability: InStock

In stock

SKU: GE-H500DD

$6,111.00

$6,111.00 +GST -15% ~~$7,190.00~~

From $11.08/day — for 12 months

Get approval in under 5 minutes Apply Now

Get Extra 11% OFF on Asber! Use coupon: EXTRA11

Fast Delivery

Best Price

Australia-wide delivery

Discover a lower price? Contact our team for a deal

Email 1300 000 927

🖨️ Product Specification PDF

The Asber Tech Line GE-H500DD is a commercial passthrough hood-type dishwasher for busy restaurants, pubs, hotels, clubs and catering kitchens — built for volumes up to 40 baskets per hour. Made in Spain and Watermark-certified for Australian installation, the GE-H500DD delivers consistent sanitisation with a 60 °C wash, 85 °C rinse and an electronic three-cycle control panel.

Why operators choose the GE-H500DD

40 baskets/hour throughput — rated for mid-to-high volume service with continuous-operation mode
3 wash cycles: 90 / 120 / 180 seconds — match the cycle to load soil level
Thermostop sanitisation — rinse hold at 85 °C guarantees temperature compliance
Built-in rinse-aid + detergent dispensers — automated dosing reduces manual handling
45 L tank (4.5 kW) + 7 L boiler (6.0 kW) — stable wash and rinse temperatures across back-to-back service
Watermark certified — Australian plumbing compliance confirmed

Specifications

Specification	Value
Brand	Asber
Model	GE-H500DD
SKU	GE-H500DD
Type	Passthrough hood dishwasher
Capacity	40 baskets/hour
Wash cycles	3 (90 / 120 / 180 sec)
Wash tank	45 L · 4.5 kW heat
Rinse boiler	7 L · 6.0 kW heat
Wash pump	0.6 kW
Rinse consumption	2.7 L per cycle
Wash temperature	60 °C
Rinse temperature	85 °C (thermostop)
Door clearance	420 mm
Power	415 V, 3-phase + N, 11.1 kW
Dispensers	Rinse-aid + detergent (built-in)
Drain pump	Not included (gravity drain)
Certification	Watermark
Product dimensions (W × D × H)	675 × 675 × 1758 mm
Packed dimensions (W × D × H)	735 × 710 × 1650 mm
Warranty	2 years parts + labour

Venue suitability

Suited to mid-volume commercial kitchens — restaurants, pubs, hotels, clubs, catering — needing a dedicated hood-type machine after a dedicated wash-off station. 40 baskets/hour handles roughly 200–400 covers per service depending on course loadout and crockery mix.

Installation notes

Requires 415 V 3-phase + N power (11.1 kW total load) and Watermark-compliant plumbing. No drain pump included — the unit drains by gravity, so the waste point must sit below the machine base. Pair with a dedicated inlet sink and outlet bench for full passthrough workflow.

Frequently asked questions

Q: Does it run on standard Australian power? A: No — the GE-H500DD requires 415 V 3-phase + Neutral power, 11.1 kW total load. A licensed electrician must install a suitable 3-phase circuit before delivery.

Q: What throughput does 40 baskets/hour translate to? A: Approximately 200–400 covers per service depending on crockery mix and course count — suits mid-to-high volume pubs, restaurants, clubs and catering kitchens.

Q: Is a drain pump included? A: No — gravity drain. The drain connection point must sit below the machine base. If your existing drain layout can't accommodate gravity flow, speak to our sales team about alternative models with integrated drain pumps.

Q: Is it certified for Australian installation? A: Yes — the GE-H500DD is Watermark certified, which is the required plumbing certification for Australian commercial dishwashers.

Q: What's included with the machine? A: Baskets and cutlery accessories are included. Rinse-aid and detergent dispensers are built-in. A dedicated inlet sink, outlet bench and detergent supply are sold separately.

Q: What's covered by the 2-year warranty? A: 2 years parts and labour on the full unit. Warranty service is managed locally through our Granville NSW showroom, with Asber parts stocked in Australia for fast turnaround.