Anvil Stand For Coa1003/4

The Anvil COR0001 is a stand for the COA1003, COA1004 and POA1001 ovens — 600 mm wide and 900 mm high. It lifts the oven to working height and gives the base storage underneath.

Why operators choose the ICE-COR0001

• Fits three ovens: the COA1003 convection oven, the COA1004 convection oven with grill, and the POA1001 pizza deck oven — all three are named by the supplier and all three are models we stock, so the pairing can be checked from either side rather than taken on trust
• Note our own product title is narrower than the facts: it reads "Stand for COA1003/4" and omits the POA1001, which this stand's own description explicitly lists. We publish all three and have flagged the title for correction
• 900 mm high — that is the figure that matters, because it sets the working height of the oven sitting on it. Add the oven's own height for the finished assembly and check it against your operators before you commit
• 600 x 540 mm footprint — a compact base for a benchtop-format oven that needs to come off the bench
• Unpowered — the oven above it is the powered part; there is nothing to connect here
• 12 months — the duration is recorded but the source does not say whether labour is included, so we are not going to assume either way. Ask us and we will confirm the split before you buy

Specifications

Venue suitability

An oven stand suits any kitchen running a benchtop convection or pizza deck oven that should not be taking up bench space — cafes, bakeries, pizzerias and function kitchens. It puts the oven at a working height and turns the space beneath it into storage rather than a gap.

This stand is made for the COA1003 convection oven, the COA1004 convection oven with grill and the POA1001 pizza deck oven. Compare the rest of the Anvil range, or browse our stands and accessories.

Installation & delivery

No electrical supply — this is an unpowered stand. Dimensions are recorded width x height x depth: 600 x 900 x 540 mm — note the Anvil order puts height second, so the last figure is the depth. The 900 mm height is the number to plan against, because the finished working height is this plus the oven on top. No weight is recorded. Confirm your oven model against the three listed above before ordering.

Warranty terms are per product — see our warranty information page.

Frequently asked questions

Q: Which ovens does it fit?

Three: the COA1003 convection oven, the COA1004 convection oven with grill, and the POA1001 pizza deck oven. All three are named by the supplier as hosts for this stand and all three are ovens we stock, so you can check the pairing from either side. Worth flagging that our own title for this product says "Stand for COA1003/4" and leaves out the POA1001 - the stand's own description lists it, and we have flagged the title for correction.

Q: How high will my oven end up?

The stand is 900 mm high, so the finished working height is 900 mm plus your oven. That is the figure to check against the people who will use it - a benchtop oven on a 900 mm stand puts the top shelf higher than you might expect, which matters for loading and for seeing into it.

Q: Does it need power?

No. It is an unpowered stand; the oven it carries is the powered part.

Q: Is there storage underneath?

Yes - the space under the oven is usable rather than dead. The stand is 600 x 540 mm in footprint, so it takes trays, pans or the oven's own accessories.

Q: What warranty does it carry?

Twelve months. Our record gives the duration but does not say whether labour is included, and we are not going to assume - ask us and we will confirm the split before you buy. See our warranty information page for the general terms.