Modular Systems Stainless Steel Double Deep Pot Sink 1410-6-DSB

4. Body (rewrite)

The Modular Systems 1410-6-DSB is a commercial double-bowl stainless steel pot sink built for restaurant dishpits, commercial kitchens, and scullery stations that handle large pots, trays, and gastronorm pans. Two deep 610 × 400 × 450 mm bowls give room for full-size cookware, and a 100 mm raised splashback keeps spills off the wall and back into the sink.

Key features

• Twin deep bowls (610 × 400 × 450 mm each) — fit full-size pots, sheet pans, and GN 1/1 trays
• 100 mm raised splashback — channels water back into the sink, protects wall finishes
• All stainless steel construction — hygienic, easy to wipe down, long service life
• Flat-pack delivery + easy self-assembly — reduces freight cost vs. pre-welded units
• Adjustable feet — stable on uneven kitchen floors
• 1410 × 600 × 900 mm footprint — matches standard 900 mm bench-line height

Specifications

Venue suitability

Suits full-service restaurant dishpits, hotel back-of-house, catering prep, commercial bakeries, and school canteens — anywhere pots and trays need a dedicated scrubbing station separate from the dishwasher. Width matches most standard 1400–1500 mm wall runs.

What's supplied / what's not

Supplied flat-packed with assembly instructions and basic tools. Taps are not supplied — specify tap set separately (pre-rinse spray, goose-neck, or standard mixer depending on the build). Waste plumbing is standard 40 mm stainless — connect via a licensed plumber.

FAQ block

Q: Are taps included? A: No — the sink is supplied without taps or waste plumbing. Most operators pair it with a pre-rinse spray tap or a commercial mixer tap, sized to the site's water pressure. We stock compatible tap sets in our taps and rinse jets range.

Q: What size pots and pans will fit? A: Each bowl is 610 × 400 × 450 mm (W × D × H). That clears full-size (GN 1/1) trays, 32 cm stock pots, and most commercial pan formats. Two bowls side-by-side means a wash-and-rinse workflow without moving to a second sink.

Q: Is assembly difficult? A: The sink ships flat-packed. Most builds take 30–60 minutes with a second person — instructions and basic tools are supplied. Flat-pack is why the freight cost stays low on a 1410 mm unit.

Q: What warranty is covered? A: 2 years parts-only warranty through Modular Systems. Stainless-steel sinks rarely fail structurally; warranty mostly covers manufacturing defects on welds, feet, and fittings.

Q: What gauge/grade is the stainless steel? A: Modular Systems sinks are commercial-grade stainless steel constructed for daily commercial use. For sites with specific spec requirements (e.g., 304 vs 430 grade, minimum gauge), contact our team before ordering so we can confirm the exact build.

Q: Can the feet be adjusted for uneven floors? A: Yes. The adjustable stainless feet take out floor-level variation so the sink sits level on concrete, tile, or sheet vinyl without shimming.