Nemco NCC0003 Easy Cheeser 18mm and 9mm Cube

The Nemco NCC0003 Easy Cheeser is the two-cut-size build of Nemco's manual block cuber. It ships with interchangeable cut arms in 18 mm and 9 mm, so one machine covers both a salad or pizza cube and a finer cube for sauces, toppings and garnish. Like the rest of the range it shears with tensioned stainless steel wires rather than blades, works a 2 kg block in about 75 seconds, and runs with no power point at all.

Why operators choose the NCC0003

• Two cut sizes, one machine — the interchangeable arms are the reason to choose this model over the fixed-arm NCC0002. Swapping arms is a bench-side change, not a service job
• 18 mm for salad and pizza, 9 mm for finer work — the coarse arm handles garden salads and pizza topping; the fine arm suits sauces, quiches, toasties and anything that needs the cheese to melt or distribute faster
• Wire shear instead of a blade — wire cuts cheese cleanly where a knife edge loads up and drags. It is the reason a cheeser stays usable through a long service
• Operator-replaceable wires — the wear part can be changed by your own staff on site, so a worn wire does not take the machine out of the kitchen
• Same 318 x 172 mm footprint as the single-arm model — the second cut size costs you no extra bench space at all
• Manual throughout — no power, no outlet and no electrician, so it can sit anywhere on the bench and adds nothing to your electrical load

Specifications

Venue suitability

The right pick where one section has to produce more than one cheese cut — a pizza bench that also plates antipasto, a salad line that runs both a garden salad and a finer feta or haloumi cube, a catering kitchen working to several menus off one bench, or a cafe doing both salads and toasties. If you only ever cut one size, the fixed-arm NCC0002 does the same job on the coarse cut.

See the full manual veg prep machines range we carry, or browse all commercial food preparation equipment.

Installation & delivery

No installation and no connection. Allow about 318 x 172 mm of bench and clearance above the 336 mm body for the full handle stroke. Both cut arms are supplied with the machine and change over by hand, so keep the spare arm somewhere on the section rather than in a store room. There is no power point and no electrician involved. Wires are the consumable and your own staff can replace them. Dispatched Australia-wide.

Also available as the NCC0002 with a single fixed 18 mm cut arm.

Warranty terms are per product — see our warranty information page.

Frequently asked questions

Q: What is the difference between this and the NCC0002?

The cut arms. The NCC0002 is fixed at an 18 mm cube. The NCC0003 is supplied with interchangeable 18 mm and 9 mm arms, so one machine gives you both a salad or pizza cube and a finer cube. Everything else - the wire shear, the 2 kg throughput, the aluminium body, the footprint and the warranty - is the same.

Q: Are both cut arms included?

Yes. The supplier records the machine as supplied with easily interchangeable arms in both 18 mm and 9 mm. Neither is an extra-cost accessory.

Q: How long does it take to swap the arms?

The supplier describes the arms as easily interchangeable and it is designed as a bench-side change by the operator, not a service task. We do not have a manufacturer time figure for the swap, so we will not quote one.

Q: Does it need power?

No. It is fully manual - no motor, no lead, no plug. No outlet, no switchboard work and no electrician are involved.

Q: What is the wear part?

The stainless steel cutting wires. They are specified as operator replaceable, so your staff can change them on the bench.

Q: What warranty does it carry?

Twelve months, back to base - a warranty repair happens at the service agent's workshop and the unit comes back to you, rather than a technician attending site. Full terms are on our warranty information page.