Orved Vacuum Sealer VM45 VMO9945

The Orved VM45 (VMO9945) is an all-stainless chamber vacuum sealer with a 47 L chamber, a 456 mm sealing bar with a double seal and a 25 m3/h Busch pump. It runs on 1.2 kW, 220-240 V single phase.

Why operators choose the VM45

• 456 mm sealing bar with a double seal — wide enough for large bags of primal cuts, whole fish or multi-portion packs, and two seal lines give a margin of safety on bags that go into a water bath
• 25 m3/h Busch oil-recirculation pump, down to 2 mbar (99.8% vacuum) — a large pump for a large chamber, so cycle times stay short
• 47 L horizontal chamber, 551 x 487 x 175 mm, in 304 stainless steel, as is the housing
• Absolute vacuum sensor that needs no calibration, 10 editable programs and a cycle for vacuum containers
• Oil-dehumidifying cycle and a resettable oil-change alarm — protect the pump, the part that is most expensive to replace
• Lid opens itself at the end of the cycle — and needs 916 mm of height when open, against 500 mm closed
• Check the plug — the supplier records a 2 m cord with an IEC/Schuko plug, which is a European fitting. Confirm with us that it ships with an Australian plug
• 12-month warranty — the parts/labour split is not recorded; ask us before you buy

Specifications

Venue suitability

A large-chamber machine for butchers, smallgoods makers, seafood processors, central kitchens and high-volume sous vide operations — anywhere the bags are big or the throughput is high enough that a smaller chamber becomes the bottleneck.

Compare the Orved VM41 and VM20, or browse our chamber vacuum sealers and butcher and smallgoods equipment.

Installation & delivery

1.2 kW on 220-240 V single phase — about 5 amps. The recorded plug is IEC/Schuko (European), so confirm with us that it is supplied with an Australian plug before it ships. 612 mm wide, 700 mm deep, 500 mm high — 916 mm with the lid open, so check the clearance under any shelf above the bench. Rated for rooms between 12 and 40 °C. No weight is recorded.

Warranty terms are per product — see our warranty information page.

Frequently asked questions

Q: How big a bag can it take?

The sealing bar is 456 mm long with a double seal, in a 551 x 487 x 175 mm chamber, so bags up to about 456 mm wide.

Q: Will it plug into an Australian outlet?

The supplier records a 2 m cord with an IEC/Schuko plug, which is a European fitting. It draws about 5 amps, well within a standard outlet - ask us to confirm it ships with an Australian plug.

Q: How much height does it need?

500 mm closed and 916 mm with the lid open. Check any shelf or cupboard above the bench.

Q: Can it vacuum containers outside the chamber?

Yes. It has a cycle for vacuum containers using the suction device, and it can vacuum embossed bags outside the chamber.

Q: What warranty does it carry?

12 months. Our record gives the duration but not the parts and labour split - ask us and we will confirm it before you buy. See our warranty information page for the general terms.