PakMax 98 mm Dome Cold Cup Lid CCFL-98C-PET-LID-1 Carton of 1000

The PakMax CCFL-98C-PET-LID-1 is a clear PET dome lid with a recorded 98 mm base and a height of 46 mm, supplied in a carton of 1000 and recorded at -20 to +60 degrees C. It is the tall profile, leaving room above the rim for whipped cream, foam or toppings.

Why operators choose the CCFL-98C-PET-LID-1

• 98 mm base - the figure that decides fit - the PakMax 98 mm PET cold cups record a 98 mm rim and "98MM LID" as their suitable lid, so the two halves are recorded to the same number from both sides
• 46 mm high - PakMax records the same 98 mm base for the flat lid CCFL-98C-PET-LID and the sip-through lid CCSTL-98C-PET-LID, so the choice between them is profile, not fit.
• 46 mm dome - more than four times the height of the flat lid, and the whole reason to choose it - anything that stands proud of the rim is not compressed when the lid goes on
• Room for toppings above the rim - the supplier sells it for whipped cream, foam and toppings on frappes, smoothies and specialty cold drinks
• Clear PET (polyethylene terephthalate) - the drink stays visible through the lid, which is what a made-to-order cold drink sells on
• Rated -20 to +60 degrees C - a cold-drink range, recorded against this lid specifically - the PET cold cups carry the same figure, so neither half of a closed pair sets a lower ceiling than the other
• Crack resistant - the supplier's wording for PET under the flex of seating and removing a lid
• 1000 per carton - recorded explicitly, so cost per serve is calculable
• Recyclable - the supplier's own wording
• Stackable - the supplier describes the range as stacking for storage and fast service

Specifications

Venue suitability

Suits cafes, juice and smoothie bars, takeaway counters, food trucks and events serving cold drinks in 98 mm PET cups.

See the full PakMax range.

The PakMax 98 mm PET cold cups this lid is recorded to fit include the 16 oz cup CC-98-16C and the 20 oz cup CC-98-20C, both sold separately.

Installation & delivery

Nothing to install - this is a single-use disposable supplied as a carton of 1000. The carton measures 515 x 402 x 450 mm with a gross weight of 4.2 kg. Freight on a light, bulky carton like this is calculated on its cubic volume rather than its gross weight, so the shipping weight shown at checkout comes from the carton size. Store flat and dry, out of direct sun - PET distorts well below the temperature paper tolerates.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: Which cups does this lid fit?

The supplier records it as fitting PakMax 98 mm PET cold cups. Both CC-98-16C and CC-98-20C record a 98 mm rim and "98MM LID" as their suitable lid, so the lid base and the cup rim are opposite sides of the same joint and they are recorded to the same figure. Order lids against the rim diameter rather than the ounce size: PakMax also makes a 90 mm cold cup range, and a 90 mm lid and a 98 mm lid are not interchangeable.

Q: How is it different from the other 98 mm lid profiles?

PakMax records the same 98 mm base for the flat lid CCFL-98C-PET-LID and the sip-through lid CCSTL-98C-PET-LID, so the choice between them is profile, not fit. This one is the dome lid at 46 mm. The flat lid CCFL-98C-PET-LID is 11 mm and carries a moulded straw cross; the sip-through lid CCSTL-98C-PET-LID is 12 mm with an opening you drink straight through; the dome lid CCFL-98C-PET-LID-1 is 46 mm and leaves room above the rim. All three take the same 98 mm cups and all three are recorded at -20 to +60 degrees C.

Q: Why does the SKU read CCFL when this is a dome lid?

It is a supplier record we have published exactly as it stands, and it is worth flagging. CCFL is the supplier's own code for a cold cup FLAT lid - it is the SKU of the flat lid in this same range - and the supplier uses CCDL for a dome lid elsewhere in its catalogue. This product is a dome: the supplier's product name says so, its description says so, its photographs show a domed lid, and its recorded height of 46 mm is more than four times the flat lid's 11 mm. So the item is not in doubt, only the code. Order by the full SKU including the "-1", and if you are raising a purchase order against the supplier's own paperwork, check that it has not dropped it - the supplier's page title does.

Q: How many does a carton hold, and what does it weigh?

1000 lids per carton, at 515 x 402 x 450 mm with a gross weight of 4.2 kg. Freight on a light, bulky carton like this is charged on cubic volume rather than gross weight, so the shipping weight shown at checkout is calculated from the carton size.

Q: Are the recorded dimensions the item or the carton?

The carton. The Width, Depth and Height recorded against this product match the carton size stated in the supplier description exactly, which is how we can say it with certainty rather than assuming it. The item's own size is published separately in the specifications above. Use the carton figures for storage and freight planning, not for portion planning.

Q: Can it be used for hot drinks?

No. It is recorded at -20 to +60 degrees C, and the PET cold cups it fits carry the same range. PET softens well below hot beverage temperature and will distort. Use a paper hot cup and a hot cup lid instead.

Q: Is this FSC certified?

The supplier records an FSC certification against this product and we have published it exactly as recorded. We want to be straight with you about it, though: FSC certifies forest and plant fibre, and this item is PET, which contains none. We have flagged the record with the supplier. If FSC certification is part of your own compliance or tender documentation, do not rely on this line - ask our team and we will get the certificate or a correction from the supplier before you commit.

Q: What warranty applies?

No warranty term is recorded against this SKU by the supplier. That is not unusual for a single-use disposable, and we have not borrowed a term from a sibling product. See our warranty information page, or ask our team if you need something in writing.