PakMax 98 mm Sip Through Cold Cup Lid CCSTL-98C-PET-LID Carton of 1000

The PakMax CCSTL-98C-PET-LID is a clear PET sip-through lid with a recorded 98 mm base and a height of 12 mm, supplied in a carton of 1000 and recorded at -20 to +60 degrees C. It carries a moulded sip-through opening, so the drink can be taken without lifting the lid and without a straw.

Why operators choose the CCSTL-98C-PET-LID

• 98 mm base - the figure that decides fit - the PakMax 98 mm PET cold cups record a 98 mm rim and "98MM LID" as their suitable lid, so the two halves are recorded to the same number from both sides
• 12 mm high - PakMax records the same 98 mm base for the flat lid CCFL-98C-PET-LID and the dome lid CCFL-98C-PET-LID-1, so the choice between them is profile, not fit.
• Integrated sip-through opening - the customer drinks straight through the lid, which is the point of the profile - no straw needed and the lid stays seated
• Lowest profile of the three, within a millimetre - at 12 mm it stacks and stores like the flat lid rather than the dome
• Clear PET (polyethylene terephthalate) - the drink stays visible through the lid, which is what a made-to-order cold drink sells on
• Rated -20 to +60 degrees C - a cold-drink range, recorded against this lid specifically - the PET cold cups carry the same figure, so neither half of a closed pair sets a lower ceiling than the other
• Crack resistant - the supplier's wording for PET under the flex of seating and removing a lid
• 1000 per carton - recorded explicitly, so cost per serve is calculable
• Recyclable - the supplier's own wording
• Stackable - the supplier describes the range as stacking for storage and fast service

Specifications

Venue suitability

Suits cafes, juice and smoothie bars, takeaway counters, food trucks and events serving cold drinks in 98 mm PET cups.

See the full PakMax range.

The PakMax 98 mm PET cold cups this lid is recorded to fit include the 16 oz cup CC-98-16C and the 20 oz cup CC-98-20C, both sold separately.

Installation & delivery

Nothing to install - this is a single-use disposable supplied as a carton of 1000. The carton measures 520 x 402 x 450 mm with a gross weight of 4.7 kg. Freight on a light, bulky carton like this is calculated on its cubic volume rather than its gross weight, so the shipping weight shown at checkout comes from the carton size. Store flat and dry, out of direct sun - PET distorts well below the temperature paper tolerates.

Warranty terms vary by product - see our warranty information page for full details.

Frequently asked questions

Q: Which cups does this lid fit?

The supplier records it as fitting PakMax 98 mm PET cold cups. Both CC-98-16C and CC-98-20C record a 98 mm rim and "98MM LID" as their suitable lid, so the lid base and the cup rim are opposite sides of the same joint and they are recorded to the same figure. Order lids against the rim diameter rather than the ounce size: PakMax also makes a 90 mm cold cup range, and a 90 mm lid and a 98 mm lid are not interchangeable.

Q: How is it different from the other 98 mm lid profiles?

PakMax records the same 98 mm base for the flat lid CCFL-98C-PET-LID and the dome lid CCFL-98C-PET-LID-1, so the choice between them is profile, not fit. This one is the sip-through lid at 12 mm. The flat lid CCFL-98C-PET-LID is 11 mm and carries a moulded straw cross; the sip-through lid CCSTL-98C-PET-LID is 12 mm with an opening you drink straight through; the dome lid CCFL-98C-PET-LID-1 is 46 mm and leaves room above the rim. All three take the same 98 mm cups and all three are recorded at -20 to +60 degrees C.

Q: What is a sip-through lid, and when would I choose it over a flat lid?

A sip-through lid has a moulded opening you drink straight through, so the customer does not need a straw and does not lift the lid. That matters where straws are being phased out, for drive-through and delivery, and for anything carried while walking. The flat lid CCFL-98C-PET-LID instead carries a moulded straw cross, so it is the one to choose if you serve with straws. They are the same 98 mm base and within a millimetre of each other in height, so the decision is entirely about how the drink is meant to be taken.

Q: How many does a carton hold, and what does it weigh?

1000 lids per carton, at 520 x 402 x 450 mm with a gross weight of 4.7 kg. Freight on a light, bulky carton like this is charged on cubic volume rather than gross weight, so the shipping weight shown at checkout is calculated from the carton size.

Q: Are the recorded dimensions the item or the carton?

The carton. The Width, Depth and Height recorded against this product match the carton size stated in the supplier description exactly, which is how we can say it with certainty rather than assuming it. The item's own size is published separately in the specifications above. Use the carton figures for storage and freight planning, not for portion planning.

Q: Can it be used for hot drinks?

No. It is recorded at -20 to +60 degrees C, and the PET cold cups it fits carry the same range. PET softens well below hot beverage temperature and will distort. Use a paper hot cup and a hot cup lid instead.

Q: Is this FSC certified?

The supplier records an FSC certification against this product and we have published it exactly as recorded. We want to be straight with you about it, though: FSC certifies forest and plant fibre, and this item is PET, which contains none. We have flagged the record with the supplier. If FSC certification is part of your own compliance or tender documentation, do not rely on this line - ask our team and we will get the certificate or a correction from the supplier before you commit.

Q: What warranty applies?

No warranty term is recorded against this SKU by the supplier. That is not unusual for a single-use disposable, and we have not borrowed a term from a sibling product. See our warranty information page, or ask our team if you need something in writing.