Modular Systems 304 Grade Right Inlet Single Sink Dishwasher Bench

The Modular Systems SSBD7-1200R/A is a 304-grade stainless steel single sink dishwasher inlet bench that feeds a passthrough dishwasher from the right, measuring 1200mm wide x 700mm deep x 900mm high. It combines a 450 x 450 x 300mm scraping bowl with a pre-wash landing area, so staff can scrape, rinse and load racks in one continuous motion.

Why operators choose the SSBD7-1200R/A

• Right-inlet layout — feeds racks into a passthrough dishwasher from the right, keeping the wash line flowing in one direction.
• 450 x 450 x 300mm scraping bowl — gives room to pre-rinse plates and scrape waste before loading, with a 90mm drain.
• 1.2mm SUS304 (18/8) top — withstands constant water, heat and detergents on the dirty side of the dishwasher.
• 15mm wet edge and 150mm splashback — contain splash and keep water on the bench and off the floor and wall.
• Fully welded, polished bowl — clears waste fast and cleans down with no seams to trap food.
• Adjustable stainless disc feet — level the bench to the dishwasher inlet height, with lockable castor kits available.
• Flat-packed with tools and manual — ships compactly and assembles quickly on site.

Specifications

Venue suitability

Built for commercial dishrooms running a passthrough dishwasher that need a dirty-side inlet bench with a scraping bowl and pre-wash space in a compact 1200mm footprint. The right-inlet layout suits a machine positioned to the left of the bench. It is less suited to the clean discharge side, where a dishwasher outlet bench without a bowl is the correct unit.

Compare more warewashing benches in our dishwasher inlet sinks & outlet benches range, or see the full Modular Systems collection.

Installation & delivery

Supplied flat-packed with an instruction manual and tools; connect the bowl to standard commercial waste and level to the dishwasher inlet height with the adjustable feet. Dispatched from our Sydney HQ with partner warehouses in Melbourne, Brisbane, Adelaide and Perth for faster delivery Australia-wide. Every unit is backed by the manufacturer warranty above — see our warranty information page for full terms.

Frequently asked questions

Q: What are the dimensions of the SSBD7-1200R/A? A: It measures 1200mm wide x 700mm deep x 900mm high, with a 450 x 450 x 300mm bowl and a 90mm drain hole.

Q: What does right inlet mean? A: On a right-inlet bench the dishwasher inlet and sink sit on the right side as you face the bench, so racks feed into the machine from the right.

Q: How big is the sink bowl? A: The scraping bowl measures 450 x 450 x 300mm with a 90mm drain, giving room to pre-rinse and scrape before loading.

Q: What grade of stainless steel is used? A: The benchtop is 1.2mm SUS304 (18/8) stainless steel, and the bowl is fully welded and polished inside and out.

Q: Is assembly required? A: Yes, it is supplied flat-packed with an instruction manual and tools for quick on-site assembly.

Q: What warranty does it come with? A: The SSBD7-1200R/A carries a 2-year parts-only warranty.